Copy Recorded Images - Panasonic WJ-NV300K/GJ Operating Instructions Manual

Copy recorded images

Copy images recorded by the recorder onto SD
memory card or external storage devices. It is recom-
mended to make back-up copies on a regular basis
for unexpected situations such as malfunction of the
hard disk drives. Refer to page 135 for further infor-
mation about the copy function. Refer to page 172 for
information on how to play copied images.
Step 1
Click the [Control] button on the top page (☞ page
146) of the operation window.
Step 2
Click the button in the [Copy] box.
The "Copy" window will be displayed.
→ →
Step 3
Specify the detailed conditions of recorded images to
be copied. Specify the information to be set as condi-
tions.
[Date & time range]
Designate the start date & time and the end date &
time of recorded images to be copied. Click the [C]
button, and then designate date & time.
[Camera]
Select the camera you wish to copy. Mark the check-
box next to the desired camera. When the checkbox
for [All] is marked, the checkboxes of all cameras can
be marked.
[Copy drive]
Select the SD memory card or the external storage
device (connected to the copy port) as the copy des-
tination.
Mark the checkbox corresponding to either of "HDD
>> SD" or "HDD>>Copy port".
[Alteration detection]
Determine whether or not to attach the alteration
detection code to the recorded images to be copied.
When the alteration detection code is attached, it is
possible to check if the copied recorded images have
been altered or not when playing the copied recorded
images using the viewer software. Click the [C] but-
ton, and then select "On" or "Off".
167