Programmable Settings; Programming Guidelines; Ringer Setting - Panasonic KX-TG5055 Operating Instructions Manual

Programmable Settings

Programming Guidelines

The unit has several programmable functions which can be selected from the
function menu on the display (p. 13).
The soft key works
as the
Navigator key scrolls
through the menu.
How to select a function item from the menu
Make sure the handset and base unit are not being used. The handset must
be operated near the base unit and while off the base unit.
1
Press [MENU].
• The main menu is displayed (p. 13).
2
Scroll to the desired item by pressing [d] or [B].
3
Press the soft key (
4
If the item has a sub-menu, select the menu item (p. 13).
Repeat steps 2 and 3 until the desired item is displayed.
If the item has no sub-menu, go to step 5.
5
Select the desired setting by pressing [d] or
[B], then press the soft key (
• A confirmation tone will be heard and the setting
will be saved.
6
Press [OFF] to exit programming mode.
• To go back to the previous menu, press the soft key (
( ) while "---(Go back)----" is displayed. If you press this key in the
SELECT
main menu, the unit will exit programming mode.
• After programming is complete, the display will return to the main menu or the
sub-menu depending on which menu the selected item is located. (See the menu
table on page 13.)
• You can exit programming mode at any time by pressing [OFF].
• If you do not press any buttons for 60 seconds, the unit will exit programming mode.
• If the unit detects a problem, an error message will be displayed (p. 46) and/or
error beeps will sound.
12
BACK
key.
) to select the desired item.
SELECT
Handset
BACK BACK SAVE SAVE
).
SAVE
The soft key works as
the SAVE SELECT or SAVE
[OFF] exits
programming.
[MENU] enters the
function menu.
B

Ringer setting

d
BACK P LAY
dB
BACK P LAY
), or press the soft key
BACK
key.
SELECT
SAVE