Advertisement
Step 7:
• Locate the third wall cabinet (iXW1180-1). Place it to the right of wall cabinet (iXW1155-P-46) on top of RIGHT
base top
(SSW1004
iXBtop). Align the holes of both wall cabinets while also aligning the pre-drilled holes in
the bottom of wall cabinet (iXW1180-1) with threaded inserts in the base top
• Bolt wall cabinet (iXW1180-1) to the base top
Step 8:
• With pre-drilled holes in wall cabinets aligned together, place the 1/4"-20x30mm joint connector bolt w/ Loctite
through pre-drilled hole on the inside of one of the cabinets making sure bolt is pushed as far as it can go. While
holding the joint connector bolt flush to the cabinet, take a 1/4"-20x17mm joint connector nut and attach it to
the end of the bolt (through the other base cabinet) turing it clockwise until it's completely on. Use a 4mm Allen
wrench or 4mm hex bit and a screw gun to tighten as needed.
• Repeat this for the (3) remaining attachment points.
wibenchmfg.com
(SSW1004
iXW1155-P-46
JCN
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
Assembly Instructions
(SSW1004
iXBtop) using ¼"-20x30mm joint connector bolts.
JCB
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
iXchange® Wall
SSW1004
iXBtop).
iXW1180-1
SSW1004 iXBtop
JCB
6
Advertisement
