Advertisement
Step 14:
• Attach carriers to whiteboard panels and tighten
jamb nut against carrier. Slide whiteboard panels
onto the track from the open end. Use the front
two channels if only using 2 boards. There will
only be one panel per track.
Step 15:
• Slide map hooks/clips and roller brackets on from
open end.
Step 16:
• Attach right side panel (iXFER) to wall cabinet (iXW1180-1) and base cabinet (iXB3145-SSW1004) using
¼"-20x30mm joint connector bolts. Pre-drilled holes in the cabinets will line up with threaded inserts in the
right side panel (iXFER).
wibenchmfg.com
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
Assembly Instructions
JCB
iXB3145-SSW1004
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
iXchange® Wall
iXW1180-1
SSW1004
iXFER
11
Advertisement
