Advertisement
Step 5:
• Locate the second wall cabinet (iXW1155-P-46). Place it to the right of wall cabinet (iXW1180-1) and on top of
both base tops
(SSW1004
in the bottom of (iXW) with threaded inserts in both base tops. The seam of the two base tops will be in the
middle of this wall cabinet.
• Bolt wall cabinet (iXW1155-P-46) to the base tops using ¼"-20x30mm joint connector bolts.
Step 6:
• With pre-drilled holes in wall cabinets aligned together, place the 1/4"-20x30mm joint connector bolt w/ Loctite
through pre-drilled hole on the inside of one of the cabinets making sure bolt is pushed as far as it can go. While
holding the joint connector bolt flush to the cabinet, take a 1/4"-20x17mm joint connector nut and attach it to
the end of the bolt (through the other wall cabinet) turing it clockwise until it's completely on. Use a 4mm Allen
wrench or 4mm hex bit and a screw gun to tighten as needed.
• Repeat this for the (3) remaining attachment points.
iXW1180-1
JCN
JCB
wibenchmfg.com
iXBtop). Align the holes of both wall cabinets while also aligning the pre-drilled holes
iXW1155-P-46
SSW1004 iXBtop
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
Assembly Instructions
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
iXchange® Wall
SSW1004
JCB
5
Advertisement
