Line Selection; Line Selection; Room Monitor - Panasonic KX-TG2720S Operating Instructions Manual

Special Features

Line Selection

The handset and base unit will automatically select a free line when you make a call by
pressing or
will also select the in-coming called line when you answer the in-coming call. You can
change the line selection of the handset and base unit. There are three options as following:
Line 1: Line 1 will be selected.
Auto (factory preset): A free line will be selected (Line 1 has priority) when making a call by
pressing or
when you call back using Caller ID information (p. 34), the line that is indicated will be selected.
You can also select any line by pressing one of line soft keys (
handset or a line button on the base unit. When a call is being received, the called line is
selected when you press
Handset
Make sure the handset is not being used.
1 Press
(CONF/FUNCTION),
or
Ö Ñ
Scroll to "Set tel line" by pressing
2
or , and press
Ñ
Press
3
á
•The current setting will be displayed.
Select the desired line selection, "Line1",
4
"Line2" or "Auto", by pressing
Press the right soft key (
5
•A beep sounds.
•To exit the programming mode, press (OFF).
Base unit
Make sure the base unit and the handset are not being used.
Press
1
(CONF/FUNCTION)
pressing
2 Scroll to "Set base unit" by pressing
or
Ö Ñ
Press
3
á
•The current setting will be displayed.
Select the desired line selection, "Line1",
4
"Line2" or "Auto", by pressing
and press the right soft key (
•A beep sounds.
•To exit the programming mode, press (OFF).
66
on the handset or
on the handset or (DIGITAL!SP-PHONE) on the base unit. However,
or
, and press .
á
.
á
at "Line selection".
or , and press
Ö Ñ
, and press .
á
at "Line selection".
(DIGITAL!SP-PHONE)
Line 2: Line 2 will be selected.
or (DIGITAL!SP-PHONE) to answer the in-coming call.
scroll to "Initial setting" by pressing
Ö
or
Ö Ñ
).
SAVE
, and scroll to "Initial setting" by
.
á
or
Ö Ñ
)
.
SAVE
on the base unit. The unit
or
LINE1 LINE2
Caller ID edit
H
Set tel line
Voice mail
---------------
H

Line selection

Set dial mode
Line selection
Incomin
.
GF
LINE1 LINE2
Voice mail
H
Set base unit
Registration

Room monitor

H
Line selection
---------------
Line selection
Incomin
,
GF
LINE1 LINE2
) on the
:Auto
S A V E
:Auto
S A V E