To monitor with the handset
1
Press
(HOLD) (INTERCOM)
2
Press the right soft key (
To call the base unit, press
3
To call another handset (when the system
has additional handsets, p. 23):
Enter the extension number using the
dialing button (
•Your handset will start to monitor the room through the destination unit and
"Room monitor" will display.
•To monitor from the speaker, press
charger but you cannot place it on the base unit to continue monitoring.
Placing the handset on the base unit will disconnect room monitoring. To
switch back to the receiver, press
•"Room monitor" will display on the monitored handset. The DIGITAL
SP-PHONE indicator lights on the monitored base unit.
4
To end monitoring, press
•The base unit user can stop being monitored by pressing
(LOCATOR/INTERCOM/TRANSFER) or (DIGITAL!SP-PHONE). The monitored
handset user can stop being monitored by pressing (OFF).
•If the Room Monitor feature of the destination unit is off or the destination handset
is on the base unit, "Denied" will be displayed and busy tones will sound.
To monitor with the base unit
1
Press
(LOCATOR/INTERCOM/TRANSFER)
•The LOCATOR/INTERCOM/TRANSFER indicator light flashes.
2
To call the handset, enter the extension number using the dialing
button (
to
(1)
•The base unit will start to monitor the room through the handset.
•The handset will display "Room monitor".
3
To end monitoring, press
(DIGITAL!SP-PHONE)
• The LOCATOR/INTERCOM/TRANSFER indicator light goes out.
•The monitored handset user can stop being monitored by pressing (OFF).
•If the Room Monitor feature of the destination handset is off or the handset is on
the base unit, busy tones will sound.
For assistance, please call: 1-800-211-PANA(7262)
.
MONITOR
(0).
to
).
(1)
(8)
(OFF)
).
(8)
(LOCATOR/INTERCOM/TRANSFER)
.
Press extension#
to call
LINE1 LINE2
).
Press extension#
for room monitor
Room monitor
. You can place the handset on the
.
or place the handset on the base unit.
, and press
[
]
SP
PRIVACY
1
MONITOR
01
.
(MUTE)
or
57