Selecting The Number Of Rings - Panasonic KX-TG2583 Operating Instructions Manual

Selecting the Number of Rings

You can select the number of times the unit rings before the answering
system answers a call, from "2" to "7" or "Toll saver"*.
Your phone comes from the factory set to "Toll saver"*.
1 Press
(FUNCTION/EXIT/CH)
2 Press or
Ö
points to "Program".
Press
3
FWD/EDIT á
Press or
4
Ö
points to "TAD program".
5 Press
FWD/EDIT á
•The base unit display shows programming
options.
6 Press .
(2)
•The current setting is displayed on the base
unit.
Press , or
7
(0)
0: Selects "Toll saver"*.
2–7: The unit will answer after the selected number of rings.
8 Press
FWD/EDIT á
•A beep sounds.
•To return to the standby mode, press (FUNCTION/EXIT/CH).
*Toll saver
When you call the unit from a touch tone telephone:
If the unit answers on the 2nd ring, there is at least one new message.
If the unit answers on the 4th ring, there are no new messages.
Hang up when you hear the 3rd ring. This will save you the toll
charge for the call.
.
repeatedly until the arrow
Ñ
(Yes key).
repeatedly until the arrow
Ñ
(Yes key).
to to set the number of rings.
(2) (7)
(Save key).
H
Save directory
Ringer volume
GF H
=Yes
H
Program
GF H
=Yes
H
Save DIRECT#
Set flash time
GF H
=Yes
Talk switching
H
TAD program
GF H
=Yes
Answering
system setting.
See base unit.
Base unit display
Number of rings
:Toll saver
25