Erasing Messages - Panasonic KX-TG2322B Operating Instructions Manual

Erasing Messages

Base Unit
The unit will announce the remaining recording time after playback if it is
less than 3 minutes.
New messages cannot be recorded when:
—"Memory full" is heard.
—" " flashes on the base unit.
FULL
—the ANSWER ON indicator flashes rapidly (when the Answering System
is on).
Erase unnecessary messages. We recommend you erase unnecessary
messages after each playback.
Erasing a specific message
Press [ERASE] while the message you want
to erase is being played.
• The unit beeps, then plays back the next
message. To exit playback mode, press
[STOP] twice.
Erasing all messages
All recorded messages, except the greeting
message, can be erased at one time.
1
Press [ERASE] while the base unit is not
being used.
• "To erase all messages, press ERASE again" is
heard.
2
Within 10 seconds, press [ERASE] again.
• The unit beeps, then announces "No
messages".
• The base unit display shows "0".
For assistance, please call: 1-800-211-PANA(7262)
ANSWER ON Indicator
[STOP]
[ERASE]
27