Table of Contents
Advertisement
✿✤✦✪✣5Z✮_5.❇m ✧✬
Erasing Messages
The unit will announce the remaining recording time after playback, if it is less than
3 minutes. New messages cannot be recorded when:
—" Memory full " is heard.
—"
" is displayed on the base unit.
FULL
—the ANSWER ON indicator flashes rapidly (when the Answering System is on).
Erase unnecessary messages. We recommend that you erase unnecessary
messages after each playback.
Erasing a specific message
Base Unit
Press [ERASE] while the message you want to erase is being played.
Handset
Press [ ] [4] while the message you want to erase is being played.
• The unit beeps, then plays back the next message.
Erasing all messages
All recorded messages, except the greeting message, can be erased at one time.
Base Unit
1
Press [ERASE] .
• " To erase all messages, press ERASE again " is
heard.
2
Within 10 seconds, press [ERASE] again.
• The unit beeps, then announces " No messages ".
• The base unit display shows " 0 ".
Handset
1
Press [MENU] .
2
Scroll to " Message play " by pressing [ ] or [ ] , then press Select .
3
Press [ ] [5] .
• The unit beeps, then announces " No messages ".
• To cancel playback on the handset, press [OFF] .
• Information in the Caller List will not be erased. To erase caller information, see
page 33.
]
]
_
ANSWER ON Indicator
[ERASE]
49
Advertisement
Table of Contents
