Connecting Using A Scart Av Cable; Connecting Using The Component Video; Output - Pioneer DV-500-S Operating Instructions Manual

Connections
Connecting using a SCART AV
cable
A SCART-type AV connector is provided for
connection to a TV or AV receiver. The video
output is switchable between ordinary
composite and RGB. See AV Connector Out on
page 32 for how to set it.
The SCART AV connector also outputs analog
audio, so there is no need to also connect the
AUDIO OUT L/R jacks.
To SCART AV
input
AV CONNECTOR (RGB) TV/AV Receiver
• Use a SCART cable (not supplied) to
connect the AV CONNECTOR (RGB) output
to a SCART AV input on your TV (or AV
receiver).
TV
AC IN
Connecting using the
component video output
You can use the component video output
instead of the standard video out jack to
connect this player to your TV (or other
equipment). This should give you the best
quality picture from the three types of video
output available.
TV
VIDEO OUT AUDIO OUT
P
B
COAXIAL
P Y
R
DIGITAL AUDIO OUT COMPONENT VIDEO OUT
• Use a component video cable (not
supplied) to connect the COMPONENT
VIDEO OUT jacks to a component video
input on your TV, monitor or AV receiver.
To component
video input
L
R
02
11
En