Connecting Using A Scart Av Cable; Connecting Using The S-Video Output; Connecting Using The Component Video; Output - Pioneer DV-600AV-S Operating Instructions Manual

02
Connections
Connecting using a SCART AV
cable
A SCART-type AV connector is provided for
connection to a TV or AV receiver. The video
output is switchable between ordinary
composite, S-video (DV-600AV only) and RGB.
See AV Connector Out on page 40 for how to
set it.
The SCART AV connector also outputs analog
audio, so there is no need to also connect the
AUDIO OUT (5.1ch)/AUDIO OUT L/R jacks.
To SCART AV
input
• Use a SCART cable (not supplied) to
connect the AV CONNECTOR (RGB) output
to a SCART AV input on your TV (or AV
receiver).
12
En
TV
AC IN
OPTICAL COAXIAL
AV CONNECTOR (RGB) TV/AV Receiver
DIGITAL AUDIO OUT
DV-600AV
Connecting using the S-video

output

(DV-600AV only)
If your TV (or other equipment) has an S-video
(S1) input, you can use the S-video output on
this player instead of the standard (composite)
output for a better quality picture.
• Use an S-video cable (not supplied) to
connect the S-VIDEO OUT to an S-video
input on your TV (or monitor or AV
receiver).
Line up the small triangle above the jack with
the same mark on the plug before plugging in.
TV
VIDEO OUT
P
B SL
SR
P Y
R
HDMI OUT COMPONENT VIDEO OUT S-VIDEO OUT AUDIO OUT (5.1ch)
DV-600AV
To S-video input
C L
SW
R