Connections; Connecting Using An Audio/Video Cable; Connecting Using A Scart Av Cable - Pioneer DV-320K Operating Instructions Manual

Section

Connections

03
 Be sure to turn off the power and
unplug the power cord from the power
outlet whenever making or changing
connections.
 Connect the power cord after all the
connections between devices have been
completed.

Connect the player's video output
directly to the TV.
This player supports analog copy protec-
tion technology. Therefore the picture
may not be displayed properly if con-
nected to a TV via a DVD recorder/ video
deck or when playing the player's out-
put material that is recorded by a DVD
recorder/ video deck. Furthermore, the
picture may not be displayed properly due
to the copy protection when the player
is connected to a TV with a built-in video
deck. For details, contact the manufac-
turer of your TV.
12
En
Connecting using an audio/
video cable
Player's rear panel (DV-420V)
P
B VIDEO
OUT
P Y
R COAXIAL
HDMI OUT COMPONENT VIDEO OUT DIGITAL AUDIO OUT
Player's rear panel (DV-320)
Connecting using a SCART
AV cable
 The video signal to be output can be
selected (AV Connector Out on page 31).

Analog audio signals are also output from
the SCART AV connector.
Yellow
AUDIO OUT
L
White
Red
R
Audio/video
cable (included)
To audio/video
input terminals
TV
