Table of Contents
Advertisement
1/180, 1/125, 1/100, 1/90, 1/60, 1/30, 1/15, 1/8, 1/4,
1/2, 1 (sec.)
SNC-RX550P: 1/10000, 1/6000, 1/3500, 1/2500,
1/1750, 1/1250, 1/1000, 1/600, 1/425, 1/300, 1/215,
1/150, 1/120, 1/100, 1/75, 1/50, 1/25, 1/12, 1/6, 1/3,
1/2, 1 (sec.)
Iris
Select the iris from the drop-down list.
Selectable values of the iris are as follows:
Close, F28.0, F22.0, F19.0, F16.0, F14.0, F11.0, F9.6,
F8.0, F6.8, F5.6, F4.8, F4.0, F3.4, F2.8, F2.4, F2.0, F1.6
Gain
Select the gain from the drop-down list.
Selectable values of the gain are as follows:
-3, 0, +2, +4, +6, +8, +10, +12, +14, +16, +18, +20, +22,
+24, +26, +28 (dB)
Brightness
Fine adjust the brightness for the exposure set in the
exposure mode. It is brighter when a larger value is
selected, and it is darker when a smaller value is
selected. A value from –5 to +5 can be set.
Saturation
Select the saturation in 7 steps, from –3 to +3.
Selecting +3 provides the image with the highest
saturation.
Sharpness
Select the sharpness in 7 steps, from –3 to +3.
Selecting +3 provides the image with the highest
sharpness.
Contrast
Select the contrast in 7 steps, from –3 to +3.
Selecting +3 provides the image with the highest
contrast.
Note
The brightness, saturation, and contrast settings are
effective for the images on a computer. They are not
effective for the video output.
User preset
You can save the present settings in the camera as
custom settings, or you can load the settings saved in the
camera.
This function is useful when you temporarily change the
settings for the image or reset them to the previous
settings.
Save: Click to save the present settings of the Picture
tab.
40
Setting the Camera Image and Audio — Camera Menu
Load: Click to load the saved settings. To use them,
click OK.
OK/Cancel
See "Buttons common to every menu" on page 31.
Day/Night Tab
Use this tab to set the day/night function of the camera.
Day/Night mode
Select the day/night mode from among five modes.
Disable: Always works in day mode.
Auto: Normally works in day mode. It switches
automatically to night mode in a dark place.
Note
The day/night mode is not switched to night mode
automatically when Exposure mode is set to Shutter
priority, Iris priority or Manual in the Picture tab.
Manual: Switch the day/night mode manually. When
you select Manual, On and Off become active.
When you select On, the camera works in night
mode. When you select Off, it works in day mode.
Timer: Normally the camera works in day mode. It
switches to night mode at the time that you have you
set in the Schedule menu.
Advertisement
Table of Contents
