Table of Contents
Advertisement
Control panel
Click to display the following control panel.
You can control pan, tilt, zoom, and focus of the camera.
(page 25)
Pan/Tilt control
Click the arrow button of the direction in which you
want to move the camera. Keep it pressed to move the
camera continuously.
To return to the home position, click
You can select the operation mode of the 8-direction
arrow buttons for panning and tilting in PTZ mode of
the System menu.
Zoom control
Press
to zoom out, and press
Zooming continues while the button remains pressed.
Note
The four edges of the image may be dark depending on
the zoom position. This is a phenomenon related to the
structure of the camera, and does not cause a problem.
Focus control
To focus on a nearby object, press
distant object, press
By pressing
optimum position.
Note
To control the focus manually, set Focus mode of the
Camera menu to Manual. (page 38)
22
Configuration of Main Viewer
.
to zoom in.
. To focus on a
.
, the focus is set to the
Trigger
(Displayed only when the camera Viewer mode
(page 57) is set to Full and one or more triggers are
enabled in the Trigger menu (page 73).)
Select the function you want to use from the drop-down
list and click
. The selected function is activated.
The selectable functions are as follows:
– send the still image files attached to an e-mail
(page 28)
– send the still image files to an FTP server (page 28)
– record the still image files in the built-in memory,
ATA memory card (not supplied) or "Memory Stick"
(not supplied) (page 28)
– control the alarm output (page 29)
– switch the Day/Night function on/off (page 29)
– play the audio file stored in the camera (page 29)
Transmission (TCP/UDP
transmission mode)
(Displayed only when the camera image is in MPEG4 or
H.264 and the ActiveX viewer is used.)
Each click switches the transmission mode of the video/
audio data between TCP mode, UDP (Unicast) mode,
and UDP (Multicast) mode. (page 30)
The last selected mode is saved in the computer, and will
stay selected for the next startup.
Volume
(Displayed when Microphone (page 38) is set to On.)
Drag the
bar to adjust the volume.
When you click
, the icon changes to
audio output stops. To output the audio, click
Note
If
does not appear when the Java applet
viewer is used, Audio codec in the Camera menu may
not be set to G.711 (64 kbps) (page 38), or Java may not
be installed correctly.
To check if Java is installed correctly, refer to "Java
applet viewer" of "About viewers" on page 19.
and the
again.
Advertisement
Table of Contents
