Table of Contents
Advertisement
Perf orm ing Several Com m ands in Sequence Aut om at ically
(M acro Play)
The Macro Play function lets you link several IR codes in
a sequential order as a single command. The remote
provides 2 macro lists (MACRO 1 and 2). You can specify
up to 8 IR codes for each macro list.
Set t ing t he sequence of IR codes
1
Press SET UP .
The set up list appears.
IR SET
LEARNING
DOWNLOAD
AUTO POWER
2
M ove the easy scroll key to select "IR SET," then
press the key to enter the selection.
The IR SET list appears.
<IR SET>
[ MACRO 1 ]
[ MACRO 2 ]
EXIT
3
M ove the easy scroll key to select "M ACRO 1" (or
"M ACRO 2"), then press the key to enter the
selection.
The PROGRAM list appears.
Program No.?
Macro 1-1
Macro 1-2
Macro 1-3
4
M ove the easy scroll key to select the macro step
number ("M acro 1-1" for example) then press the
key to enter the selection.
The CATEGORY list appears.
CATEGORY?
Button
VCR
T V
5
M ove the easy scroll key to select the component
category ("VCR" for example) then press the key to
enter the selection.
The MAKER list appears.
MAKER?
Sony VTR1
Sony VTR2
Sony VTR3
Downloaded from:
https://www.usersmanualguide.com/
6
M ove the easy scroll key to select the maker, then
press the key to enter the selection.
The FUNCTION list appears.
FUNCTION?
* NO SET
* ALL/OFF
* WAIT TIME
7
M ove the easy scroll key to select the IR code for
the operation you w ant to perform, then press the
key to enter the selection.
The PROGRAM list reappears.
Program No.?
Macro 1-1 x
Macro 1-2
Macro 1-3
8
Repeat steps 4 through 7 to program up to 8 IR
codes.
When you have finished programming IR codes,
select "EXIT" in step 7.
To use learned codes under t he M acro Play
f unct ion
Move the easy scroll key to select "Button" in step 4, then
press the key to enter selection.
Similarly, move the easy scroll key to select the button of
the learned codes. When selecting a button, you can press
the button directly, instead of scrolling down the list, to
jump to the desired button in the list and transmit the IR
code.
To cancel program m ing
Move the easy scroll key to select "EXIT" or "CANCEL"
during any step, then press the key to enter the selection.
To erase a program m ed IR code
Move the easy scroll key to select "NO SET" from the
FUNCTION list, then press the key to enter the selection.
To t urn off all connect ed Sony com ponent s
(SYSTEM STANDBY)
Move the easy scroll key to select "ALL OFF" from the
FUNCTION list, then press the key to enter the selection.
However, this function cannot apply to some Sony
components.
To delay t he out put of an IR code
Move the easy scroll key to select "WAIT TIME" from the
FUNCTION list, then press the key to enter the selection.
This allows you to specify a 1 to 10 second delay (in
1 second increments) before outputting the IR code.
17
Advertisement
Table of Contents
