Settings - Tanita DC-430MA III Instruction Manual

Settings

1
Press the
The setting screen is displayed.
Note
• The key cannot be used when the scale is measuring weight or results are displayed
while standing on the platform after measurment.
2
Select the setting item from the list below.
Enter numerical values and Press the
Setting item List
0 Check the software version
1 Date and time
* Date and time → *See
2 Number to be printed automatically
(0-3 sheet(s)) (Default: 1)
4 Cutting automatically
(0: off 1: on) (Default: 1)
5 Beep sound
(0: off 1: on) (Default: 1)
7 ID number (Automatic count up)
(0: off 1: on) (Default: 0)
8 Measurement fl ow
(0: off Two step fl ow / Measure body weight fi rst
1: on One step fl ow / Enter personal info fi rst)
(Default: 0)
* Measurement fl ow → See P.15
9 Body type selection (Athletic mode)
(0: off 1: on) (Default: 1)
* Athletic mode → See P.15&P.30
10 Height input unit
(0: off 0.1cm increments
1: on 1cm increments) (Default: 0)
Note
Enter the year, month, day, hour and minute.
The date format is "yyyy mm dd hh:mm"
(Date input range: 2014 01 01 00:00 to 2099 12 31 23:59)
3:45 pm, 10th April, 2014
Example
"2014" "04 10" "15:45"
To enter a number with 1 digit (0 to 9), press "0" fi rst.
key to change the mode.
→ Save changes and return
→ Correct input number or cancel
below
Note
key.
11 Automatic determination time of input information
(0-9 second(s)) (Default: 0)
* 0: Disables this function
18 Target body fat ratio input
(0: off 1: on) (Default: 0)
19 Printout language
(1: English, 2: French, 3: German, 4: Spanish,
5: Italy, 6: Turkey) (Default: 1)
20 Printout contents
(1: full 2: short) (Default: 1)
21 Timeout function of result display
(0: disable 1: enable) (Default: 0)
23 BMR kJ unit displayON/OFF
(0: off 1: on) (Default: 1)
45–67 Printing item settings
(0: off 1: on) → See P.26
80 SD Card mode
(0: off 1: on) → See P.29
13 13