Connections; Speaker Connection; Ac Cord Connection And ¿ Xing, Cable ¿ Xing - Panasonic TH-42PF20 Operating Instructions Manual

Connections

Speaker connection

When connecting the speakers, be sure to use only the optional accessory speakers.
Refer to the speaker's Installation Manual for details on speaker installation.
Speakers (Optional accessories)
Speaker
terminal (R)
AC cord connection and fi xing, cable fi xing
Using the clamper
Secure any excess cables with clamper as required.
Attach the clamper
1
hole
Insert the clamper
in a hole.
8
AC cord connection (see page 13)
AC cord fi xing
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on
both the left and right sides.
When using the Wall-hanging bracket (vertical)
Note:
When using the Wall-hanging bracket (vertical)(TY-WK42PV20), use the holes
to secure the cables. If the clamper is used on the hole
wall-hanging bracket.
To remove from the unit:
snaps
Keep pushing
both side
snaps
1
While pressing the lever,
insert the core wire.
2
Speaker
terminal (L)
Return the lever.
Unplug the AC cord
Unplug the AC cord pressing the
two knobs.
Note:
When disconnecting the AC cord, be
absolutely sure to disconnect the AC
cord plug at the socket outlet ¿ rst.
, the cables may be caught by the
Bundle the cables
2
Set the
tip in the
hooks
hooks
Red
Black
Red
Black
and
To loosen:
Keep
pushing
knob
the knob