Multi Pip Setup - Panasonic TH-42PF20 Operating Instructions Manual

MULTI PIP Setup

Set the two-screen display function that is activated when
1
Press to display the Setup menu.
Press to select the MULTI PIP Setup.
2
Press to display the "MULTI PIP Setup" menu.
Press to select the menu to adjust.
3
Press to adjust the menu.
MULTI PIP
Set the two-screen function.
PIP Advanced PIP
Blend PIP
Transparent Display of the Sub Screen (During Blend PIP)
Select "On" in "Transparency".
1
Set the transparency level for the sub screen in "Transparency level". (0 to 100 %)
2
Setting example Transparent image (sub screen)
Note: "Insert" cannot be set when "Transparency" is "On".
Sub Screen Insertion (During BLEND PIP)
1 Select "On" in "Insert".
Set the "Insert level". (1 to 10 %)
2
Set the brightness level threshold for discriminating between the transparent areas and non-transparent areas on
the sub screen.
Setting example Image to insert (sub screen)
Background image
(main screen)
Note: "Transparency" cannot be set when "Insert" is "On".
44
Display Mode
The display mode can be changed separately for each function that was set in "MULTI PIP Setup".
— (One screen)
For "PIP":
For "Advanced PIP":
For "Blend PIP":
Note: The display mode changes in the same way when
0 %: No transparency
is pressed.
P and P
— (One screen)
— (One screen) Full
Insert level
10 %
1 %
Setup
MULTI DISPLAY Setup
MULTI PIP Setup
Portrait Setup
Set up TIMER
MULTI PIP Setup
MULTI PIP Blend PIP
Display Mode
Off
Transparency
0%
Transparency level
Insert Off
Insert level
P out P P in P
1 to 8
P in P
is pressed.
100 %: Fully transparent
Only the areas on the overlay
image that are brighter
than the "Insert level" are
displayed on the background
image.
Two-picture Insertion
2/2
—
1