Picture Adjustments - Panasonic TH-42PF20 Operating Instructions Manual

Picture Adjustments

1
2
Select to adjust each item.
Picture
Normalise Normal
Picture Mode Normal
25
Contrast
0
Brightness
0
Colour
0
Hue
Sharpness 5
White balance Normal
Colour Management
Advanced settings
Press to enter
Advanced settings.
Advanced settings
Enables ¿ ne picture adjustment at a professional
level (see next page).
Advanced settings
Normalise
Normal
Black extension
Input level
Gamma
AGC
W/B High R
W/B High G
W/B High B
W/B Low R
W/B Low G
W/B Low B
Helpful Hint (
While the "Picture" menu is displayed, if either the N button on the remote control is pressed at any time or the
ACTION ( ) button is pressed during "Normalise", then all adjustment values are returned to the factory settings.
Press to display the Picture menu.
Press to select the menu to adjust.
Select the desired level by looking at the picture behind the menu.
Note:
Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal,
input and menu setting.
Off
0
0
2.2
Off
0
0
0
0
0
0
/ Normalisation)
Normalise
Press " " or " " button to switch between modes.
Normal
Monitor
Normal
For viewing in standard (evening lighting) environments.
This menu selects the normal levels of Brightness
and Contrast.
Dynamic
For viewing in brighter environments.
This menu selects higher than normal levels of
Brightness and Contrast.
Cinema
Ideal for movies.
Monitor
For use when creating broadcast or movie content.
With this picture, even if the overall average picture
level (APL) changes, the brightness of areas with
the same signal level does not change.
Notes:
• When "Monitor" is selected in Picture Mode, the
following menu items cannot be set.
Picture menu: Contrast
Extended life settings: Peak limit (see page 37)
Setup menu: Power save (see page 39)
MULTI DISPLAY Setup menu: AI-synchronization
(see page 43)
Portrait Setup menu: AI-synchronization (see page 46)
• If you would like to change the picture and colour of
the selected Picture menu to something else, adjust
using the items in the Picture menu. (see next page)
Press " " or " " button to switch between modes.
Normal
Colour Management On
Enables vivid colour adjustment automatically.
Dynamic
Cinema
Cool Warm
27