Screensaver (For Preventing Image Retention); Function Selection; Mode Selection - Panasonic TH-42PF20 Operating Instructions Manual

Screensaver
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a Screensaver should be used.
1
2

Function selection

3

Mode selection

4
Start setting
5
34
(For preventing image retention)
Press to display the Setup menu.
Press to select Screensaver.
Press to display Screensaver screen.
Press to select Function.
Press to select the desired function.
Negative image
White screen Overlay scrolling bar
Negative image : Negative image will be displayed on the screen.
Scrolling bar only : A white bar will scroll from left to right. The image won't be displayed.
Overlay scrolling bar : The brightness of the image will be decreased and a white bar will scroll on it.
White screen : The whole screen will be white.
Note: Overlay scrolling bar is not effective during two screen display.
Press to select Mode.
Press to select each
mode items.
When the Mode is set to On, press to select Start.
Press to start Screensaver.
The menu screen will disappear and the Screensaver will be activated. To stop the
Screensaver under On, press the R button or any buttons on the main unit.
Note: When the display is turned off, the Scrensaver will be deactivated.
Scrolling bar only
Off
Interval : Operates when Periodic Time and Operating
Time are setup and those times arrive.
Time Designation : Operates when Start Time and Finish Time
are setup and those times arrive.
Standby after SCR Saver : Operates while Screensaver duration, and
display enters standby mode.
On : Operates when Start is selected and the
ACTION ( ) button is pressed.
Setup
Signal
Screensaver
Extended life settings
Input label
Component/RGB-in select
RGB
Power save Off
Standby save Off
PC Power management Off
DVI-D Power management Off
Auto power off Off
English ( UK )
OSD Language
Screensaver
PRESENT TIME 99:99
Start
Scrolling bar only
Function
Off
Mode
1/2