Multi Pip Setup - Panasonic 58PF12UK - TH - 58" Plasma Panel Operating Instructions Manual

MULTI PIP SETUP

Set the two-screen display function that is activated when
1
Press to display the SET UP menu.
Press to select the MULTI PIP SETUP.
2
Press to display the "MULTI PIP SETUP" menu.
3 Press to select the menu to adjust.
Press to adjust the menu.
MULTI PIP
Set the two-screen function.
PIP ADVANCED PIP
BLEND PIP
Transparent Display of the Sub Screen (During BLEND PIP)
Select "ON" in "TRANSPARENCY".
1
Set the transparency level for the sub screen in "TRANSPARENCY LEVEL". (0 to 100 %)
2
Setting example Transparent image (sub screen)
Note: "INSERT" cannot be set when "TRANSPARENCY" is "ON".
Sub Screen Insertion (During BLEND PIP)
Select "ON" in "INSERT".
1
Set the "INSERT LEVEL". (1 to 10 %)
2
Set the brightness level threshold for discriminating between the transparent areas and non-transparent areas on the sub screen.
Setting example Image to insert (sub screen)
Background image
(main screen)
Note: "TRANSPARENCY" cannot be set when "INSERT" is "ON".
is pressed.
DISPLAY MODE
The display mode can be changed separately for each function that was set in "MULTI PIP SETUP".
— (One screen)
For "PIP":
For "ADVANCED PIP":
For "BLEND PIP":
Note: The display mode changes in the same way when
0 %: No transparency
INSERT LEVEL
SET UP
MULTI DISPLAY SETUP
MULTI PIP SETUP
MULTI PIP
DISPLAY MODE
TRANSPARENCY
TRANSPARENCY LEVEL
INSERT
INSERT LEVEL
P AND P
— (One screen)
— (One screen) FULL
10 % Only the areas on the overlay
image that are brighter than
the "INSERT LEVEL" are
displayed on the background
image.
1 %
2/2
MULTI PIP SETUP
PORTRAIT SETUP
SET UP TIMER
PIP
—
OFF
0 %
OFF
1
P OUT P P IN P
1 to 8
P IN P
is pressed.
100 %: Fully transparent
Two-picture insertion
45