Component Identification; Terminal Connections - M-system R7C-EC8A/UL Instruction Manual

COMPONENT IDENTIFICATION

Discrete Output Status Indicator LED
■ DISCRETE OUTPUT STATUS INDICATOR LED
LED indicators show the signal status.
ON : LED ON
OFF : LED OFF
■ OUTPUT TERMINAL ASSIGNMENT
6 7 8
+24 V Y1 Y3
1 2 3
0 V Y0 Y2
NO. ID FUNCTION
1 0V 0V (common)
2 Y0 Output 0
3 Y2 Output 2
4 Y4 Output 4
5 Y6 Output 6

TERMINAL CONNECTIONS

Connect the unit as in the diagram below.
■ EXTERNAL DIMENSIONS unit: mm (inch)
11.5
(.45)
SEN TRONIC
0 1 2 3 4 5 6 7
6 7 8 9 10
1 2 3 4 5
Output Terminals
9 10
Y5 Y7
4 5
Y4 Y6
NO. ID FUNCTION
6 +24V 24V DC
7 Y1 Output 1
8 Y3 Output 3
9 Y5 Output 5
10 Y7 Output 7
65 (2.56)
6 7 8 9 10
1 2 3 4 5
6 (.24)
10–M3 SCREW
TERMINALS
for OUTPUT
056 222 38 18
AG
CONNECTING THE EXTENSION MODULE
1) Remove the extension connector cover located at the side
of the basic module.
2) Connect the extension module.
3) Mount the combined module on a DIN rail.
17 (.66)
54 (2.13)
30 (1.18)
mailbox@sentronic.com www.sentronic.com
R7C-EC8A
DIN RAIL
35mm wide
[5 (.20)]
EM-7801-O Rev.2 P. 2 / 6