Related Manuals for Vista VK2-108VFDIR37e
Summary of Contents for Vista VK2-108VFDIR37e
- Page 1 VK2-108VFDIR37e Quick Guide Please read this manual thoroughly before use, and keep it handy for future reference.
- Page 2 Quick Installation Guide VK2-1080VFDIR37e Quick guide V1.0...
- Page 3 Quick Installation Guide 1. Description This manual applies to the VK2-1080VFDIR37ee full HD Internal fixed camera with IR illumination. • Installation Steps Follow these steps to install the VK2-1080VFDIR37e on your local network (LAN): 1. Check the package contents against the list below. 2.
- Page 4 Quick Installation Guide Name Description Lens Allows wide area to be monitored Power Cable Cable for Power source (DC 12V) Ethernet Cable Cable for Ethernet (POE) Camera Dimension See the diagrams below for the exact dimension VK2-1080VFDIR37e Quick guide V1.0...
-
Page 5: Installation
Quick Installation Guide 2. Installation 2.1 Connection • Camera Installation Carefully remove the contents from the box, and verify that nothing was damaged in shipment. 1) Mark the screw hole positions on the ceiling or wall surface using the template sheet. 2) Disassemble the camera by removing the dome cover. - Page 6 Quick Installation Guide Lock clockwise • Connecting to the RJ-45 Connect a standard RJ-45 cable to the network port of the Camera . Generally a cross-over cable is used for directly connection to PC, while a direct cable is used for connection to a hub or switch. ...
-
Page 7: Network Connection And Ip Assignment
Quick Installation Guide 2.2 Network Connection and IP assignment When the camera is first connected to the network it has no assigned IP address. So, it is necessary to allocate an IP address to the device with the “Smart Manager” utility found on the supplied CD. The factory default IP is “192.168.30.220”. -
Page 8: Operation
Quick Installation Guide 3. Operation The Camera can be used with Windows operating system and browsers. The recommended browsers are Internet Explorer, Safari, Firefox, Opera and Google Chrome with Windows. 3.1 Access from a browser Start a browser. (Internet Explorer) will be used in this example. Enter the IP address or host name of the Camera in the Location/Address field of your browser. -
Page 9: Setting The Admin Password Over A Secure Connection
Quick Installation Guide 3.3 Setting the admin password over a secure connection To gain access to the product, the password for the default administrator user must be set. This is done in the “Admin Password” dialog, which is displayed when the Camera is accessed for the setup at the first time. -
Page 10: Camera Setup
Quick Installation Guide Control toolbar The live viewer toolbar is available in the web browser page only. It displays the following buttons: The Stop button stops the video stream being played. Pressing the key again toggles the start and stop. The Start button connects to the Camera or start playing a video stream. -
Page 11: Resetting To The Factory Default Settings
Quick Installation Guide 3.6 Resetting to the factory default settings To reset the Camera to the original factory settings, go to the Setup>System> Maintenance web page (described in User’s Manual, “3.5.5 System > Maintenance”) or use the Reset button on the Camera , as described below Reset Button •... - Page 12 Quick Installation Guide Printed in Korea VK2-1080VFDIR37e Quick guide V1.0...