Table of Contents
Advertisement
• When you have good batteries, and in a good location, hold the SENSOR button for three
seconds to search for your sensors. If you regain connection while the sensor is
mounted, great. If you do not regain connection, bring the sensor within 10 feet of the
station and search again.
WHY DON'T MY TEMPERATURE/HUMIDITY READINGS
ON MY STATION MATCH THE WEATHER REPORT?
• Your temperature and humidity readings are from your sensor at your location. Your local
reporting station can be miles away so readings will differ.
TEMP ACCURACY: WHY DOES MY THERMO-HYGRO SENSOR READ INCCURATELY?
• The thermo-hygro sensor reads the environment. If your sensor reads high during the
day but not at night it is a
• Side-by-side test: Bring the thermo-hygro sensor in the house and place it next to your
station for 2 hours.
• Compare indoor and outdoor temperature. The temperatures should be within 4 degrees
to be within tolerance. The humidity should be within 14% to be within tolerance.
• If the sensor reads correctly when next to your station then try a different location
outside.
• Look for heat sources such as sunlight, door, or window frames, or reflected heat that
may cause inaccurate readings.
• Press and release the SENSOR button to view the thermos-hygro sensor ID number.
Compare the barcode on your sensor to be sure they match.
• If your temperature is reading low, and location is not an issue, you may have a bad
sensor.
WHAT DOES A READING OF "HI" OR "LO" MEAN?
• If your outdoor temperature reading shows "HI" or "LO", check that your
good.
• Overpowered or underpowered batteries can cause this reading.
• If the batteries are good, replace the outdoor sensor.
• If your temperature is fine but your humidity is reading "HI" or "LO" or dashes, your
humidity may be below 10% Relative Humidity. Your sensor does not read below 10%
humidity.
TEMP INTERMITTANT: WHY DOES MY TEMP/HUMIDITY READING COME AND GO?
mounting
problem.
batteries
are
15 |
P a g e
Advertisement
Table of Contents
