Listening To Usb Mass Storage Device/Mp3 Player - Sharp XL-DAB1H Operation Manual

Listening to USB mass storage device/MP3 player

MICRO COMPONENT SYSTEM XL-DAB1
Note:
This USB mass storage device or MP3 player is not
compatible with MTP and AAC fi le systems.
■
To play back USB/MP3 player with folder
mode off
1
Press the USB button on the remote control or
FUNCTION button on main unit repeatedly to select
USB function. Connect the USB memory device that
has MP3/WMA format fi les on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
2
Select desired fi le to be played back by pressing the
or button.
3
Press the (USB
●
File name, Title, Artist and Album name are
displayed if they are recorded in the USB memory
device.
●
Display content can be changed by pressing the
DISPLAY button.
Note:
To pause playback:
Press the (USB ) button.
) button. Playback will start.
■
To play back USB/MP3 player with folder
mode on
1
Press the USB button on the remote control or
FUNCTION button on main unit repeatedly to select
USB function. Connect the USB memory device that
has MP3/WMA format fi les on the unit. When the
USB memory is connected to the main unit, the track
information will be displayed.
2
Press the FOLDER button, then press FOLDER (
or ) button to select desired playback folder. To start
playback, go to step 4. To change the playback folder,
press the FOLDER (
folder.
3
Select desired fi le to be played back by pressing the
or button.
4
Press the (USB
●
File name, Title, Artist and Album name are
displayed if they are recorded in the USB memory
device.
●
Display content can be changed by pressing the
DISPLAY button.
■
To remove USB memory device
1
Press the (USB ) button to stop playback.
2
Press the button again and wait until "OK" is
displayed.
3
Disconnect the USB memory device from the USB
terminal.
Notes:
●
Always remove the USB memory device after "OK"
appears on the display. Improper removal of the USB
memory device may cause irregularities to happen.
●
Should this happen, turn off the unit and then turn it
on again.
●
SHARP will not be held liable for the loss of data whilst
the USB memory device is connected to the audio
system.
●
This USB memory's format supports FAT 16 or FAT
32.
●
SHARP cannot guarantee that all USB memory
devices will work on this audio system.
●
USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system.
E-7
or ) button to select another
) button. Playback will start.