Listening to USB mass storage device/MP3 player
Note:
This USB mass storage device or MP3 player is not
compatible with MTP and AAC file systems.
■
To play back USB/MP3 player
1
Press the FUNCTION button repeatedly to select USB
function. Connect the USB memory device that has
MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
2
Select desired file to be played back by pressing the
or
button.
3
Press the
/ button. Playback will start.
●
File name, Title, Artist and Album name are
displayed if they are recorded in the USB memory
device.
●
Display content can be changed by pressing the
(CLEAR) DISP button.
Note:
To pause playback:
Press the
/ button.
The following functions are the same as CD operation:
Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Programmed play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Note:
If USB memory device is not connected, "NO MEDIA" will
be shown on the display.
2012/
October/
12_XL-UR14H_OM_EN.fm
17
■
To remove USB memory device
1
Press the
button to stop playback.
2
Press the
button again and wait until "OK" is displayed.
XL-UR14
3
Disconnect USB memory device from the USB terminal.
■
File Erase
1
At USB STOP condition, press
select the desired MP3 or WMA file to be erased.
2
Press and hold down (CLEAR)/DISP button and the
display will show "ERASE ?".
3
Within 10 seconds press STOP button to cancel or
press (CLEAR)/DISP button again to confirm the file
erase selection. "ERASING" will be displayed.
4
"COMPLETE" will be displayed for a few seconds once
erasing process is finished.
■
Folder Erase
1
At USB STOP condition (Folder mode on), press
PRESET (
or
be erased.
2
Press and hold down (CLEAR)/DISP button and the
display will show "ERASE ?".
3
Within 10 seconds press STOP button to cancel or
press (CLEAR)/DISP button again to confirm the folder
erase selection. "ERASING" will be displayed.
4
"COMPLETE" will be displayed for a few seconds once
erasing process is finished.
Page
E-10
or
button to
) button to select the desired folder to
EN