Installer Setting - Thermistor - LG ABQ48GM3A4 Installation Manual

OPTIONAL OPERATION
22

Installer Setting - Thermistor

This is the function to select the temperature sensor to judge the room temperature.
FAN
SPEED
TEMP
* As the characteristic of the '2TH' function can be different in accordance with the products,
refer to the product instruction manual for its detail.
1
2
OPER
MODE
3
4
When pressing the
button simultaneously for more than 3
seconds, the system will be entered
into the installer setting mode.
- After entering into the installer setting
mode, select the thermistor sensor
setting code value by pressing the
button.
* Thermistor sensor selection code
value : 04
Select the desired setting value with the
temperature up(▲), down(▼) button.
Code value
Value
When pressing the
currently established thermistor sensor
location will be set up.
When pressing the
button simultaneously for more than 3
seconds after the setting has been
completed, the setting mode will be
released.
- If there isn't any button input for more
than 25 seconds, the installer setting
mode will also be released.
OPER
button and
MODE
OPER
MODE
*Setting value
01: Remote
controller
02: Indoor unit
03: 2TH
button,
OPER
button and
MODE