Table of Contents
Advertisement
° Playing
Playing Different Tones with the Left and
Right Hand
You can perform using different tones in the left and right regions of
the keyboard, divided at a specific note. This setting is called "Split
Play, " and the point at which the keyboard is divided is called the
"split point. "
1 . Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
2 . Turn the [ ] knob to access the "Keyboard Mode"
screen.
3 . Press the [ ] knob to confirm, and then turn the [ ]
knob to select "Split."
4 . Press the [ ] button to exit function mode.
The split screen appears.
Item
Right-hand tone
Left-hand tone
When you turn the power on, "Concert Piano" is selected as the right-
hand tone and "A.Bass+Cymbl" is selected as the left-hand tone.
When split turns on, the keyboard settings are as follows.
Split point (Power-up default): F#3
Left-hand tone
5 . To exit Split Play, press the [ ] button to enter
function mode, and change "Keyboard Mode" to
"Whole."
Changing the settings for Split Play
To edit the following settings, access the Split screen.
Operating the Unit
1 . Press the [ ] button or the [
The tone group is selected.
Changing the left-hand
2 . Turn the [ ] knob to select a tone .
tone (Split–Left Tone)
* If you select a sound from the [ ] button as the
left-hand tone, it sounds different than usual.
1 . Press the [ ] knob so that "-" "+" is shown in
the top line of the screen .
2 . Turn the [ ] knob to access "Right Tone"
screen .
Changing the right-hand
tone (Split–Right Tone)
3 . Press the [ ] knob to confirm .
4 . Press the [ ] button or the [
The tone group is selected.
5 . Turn the [ ] knob to select a tone .
Changing the point
at which tones are
1 . Press the [ ] knob so that "-" "+" is shown in
separated (Split–Point)
the top line of the screen .
Changing the volume
2 . Turn the [ ] knob to access the screen of
balance of the left-hand
the item you want to set .
tone and right-hand tone
(Split–Balance)
3 . Press the [ ] knob to confirm .
Changing the octave of
4 . Turn the [ ] knob to select the value that
the left-hand tone and
you want to change .
right-hand tone (Split–
Left/Right Shift)
Right-hand tone
] button .
] button .
Playing Two Tones Layered on Each Key
You can play two tones simultaneously from a single key. This
function is called "Dual Play. "
1 . Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
2 . Turn the [ ] knob to access the "Keyboard Mode"
screen.
3 . Press the [ ] knob to confirm, and then turn the [ ]
knob to select "Dual."
4 . Press the [ ] button to exit function mode.
The dual screen appears.
Item
tone 1
tone 2
When you turn the power on, "Concert Piano" is selected for tone
1 and "SymphonicStr1" is selected for tone 2.
5 . To exit Dual Play, press the [ ] button to enter
function mode, and set "Keyboard Mode" to
"Whole."
MEMO
You can also access the Dual screen by pressing the [ ] button and
[
] button simultaneously. Press the buttons simultaneously once
again to exit Dual Play.
Changing the Settings for Dual Play
To edit the following settings, access the Dual screen.
Operating the Unit
1 . Press the [ ] button or the [
The tone group is selected.
Changing tone 2
2 . Turn the [ ] knob to select a tone .
(Dual–Tone 2)
* If you select a sound from the [ ] button as tone 2,
it sounds different than usual.
1 . Press the [ ] knob so that "-" "+" is shown in
the top line of the screen .
2 . Turn the [ ] knob to access "Tone 1" screen .
Changing tone 1
3 . Press the [ ] knob to confirm .
(Dual–Tone 1)
4 . Press the [ ] button or the [
The tone group is selected.
5 . Turn the [ ] knob to select a tone .
Changing the volume
1 . Press the [ ] knob so that "-" "+" is shown in
balance of the two
the top line of the screen .
tones (Dual–Balance)
2 . Turn the [ ] knob to access the screen of the
item you want to set .
Changing the octave of
3 . Press the [ ] knob to confirm .
the two tones
4 . Turn the [ ] knob to select the value that you
(Dual–Tone 1/Tone
want to change .
2 Shift)
] button .
] button .
19
Advertisement
Table of Contents
