Table of Contents
Advertisement
Using the Headphones
Use headphones if you want to perform without the sound being
heard nearby. This piano has two headphone jacks, two people can
also use headphones simultaneously.
1 . Connect headphones to the headphone jacks located
on the bottom panel .
Stereo-mini
plug
Stereo 1/4"
phone plug
NOTE
When you connect headphones, sound is no longer heard from
the piano's speakers.
2 . Use the Volume buttons to adjust the volume of the
headphones .
MEMO
• A Headphones 3D Ambience effect will be applied, producing the
sensation that the sound is emanating from the piano itself even
when using headphones (p. 20).
• Whenever you are not using the headphones, you can hang them
on the headphone hook.
Using the Music rest
1 . Loosen the music rest screws slightly (2–3 mm), insert the
music rest brackets between the screws and the body of the
piano, and turn the screws to secure the music rest while
using one hand to support the music rest .
When attaching the music rest, make sure that it is firmly
inserted all the way toward the back, and use your hand to
support the music rest so that it does not fall. Also take care not
to pinch your hand.
* Do not apply excessive force to the music rest.
* If you need to remove the music rest, loosen the screws while
using one hand to support the music rest. Detach the music rest,
and then firmly retighten the screws.
Basic Operations of Functions
To operate the functions of this piano, you use the [ ]
(select/confirm) knob and the [ ] (back) button.
Change an on-screen item or
value
Confirm
Move the "-" "+" symbols in the
screen
Return to the previous screen /
Exit the current screen
Return to the default value
Moving the "-" "+" symbols
In some screens, the upper and lower lines of the screen let you change
different items or values. (Example: The upper line changes the category, and
the lower line changes the tone.) In such screens, the location of the "-" "+"
symbols alternates between the upper and lower lines each time you press
the [ ] knob, and turning the [ ] knob changes the item or value of the line
where the symbols are located.
When the "-" "+" symbols are in the
upper line, change the category
When the "-" "+" symbols are in the
lower line, change the tone
Using the Pedals
By pressing the pedals, you can apply effects to the sound of the piano.
Soft pedal
Sostenuto pedal
Use this pedal to sustain the sound. While
this pedal is held down, notes will be
Damper pedal
sustained for an extended time even if you
release your fingers from the keyboard.
(right)
The resonance of the sound is affected by
how deeply you press the pedal.
Sostenuto pedal
The notes you are pressing when this
pedal is depressed will be sustained.
(center)
This pedal is used to make the sound
softer. Playing with the soft pedal
depressed produces a sound that is not as
Soft pedal
strong as when otherwise played with the
(left)
equivalent strength. The softness of the
tone can be varied subtly by the depth to
which you press the pedal.
* When opening / closing the keyboard cover or you operate the pedals, please
be careful not to get your fingers pinched between the movable part and
the unit. In places where small children are present, make sure that an adult
provides supervision and guidance.
NOTE
Under the pedals there is an adjuster for securing
the pedals. As you use the piano, the adjuster
might creep upward, allowing the pedals to
wobble when you step on them. If this occurs,
turn the adjuster to lower it into firm contact with
the floor. In particular if the piano is placed on
carpet, you should lower the adjuster so that it
firmly presses down on the floor.
Turn the [ ] knob
Press the [ ] knob
Press the [ ] knob
Press the [ ] button
Long-press the [ ] knob
Damper pedal
Adjuster
7
Advertisement
Table of Contents
