Table of Contents
Advertisement
de
Set up and connect the device
Remove the transport locks as follows:
1.
Take the hoses out of the holders.
2.
Loosen all 4 screws of the transport
locks with a SW13 spanner and
remove.
3.
Take the power cord out of the
brackets.
14th
4th
Remove the sleeves.
5.
Insert the cover caps and lock firmly by
pressing the locking hook.
Remove the transport struts as follows:
1.
Loosen and remove all screws on the
vertical transport struts.
2.
Remove the transport struts.
Advertisement
Table of Contents
