Install Tri–Link And Cable In Storage Ports Of Sbbs - Compaq S5 User Manual

DWZZH 16–Bit UltraSCSI Hub (Rack-Mountable)
2. Install and secure tri-link in storage port of right-hand SBB (-A5). Then
install and secure the opposite end of the cable in the storage port of the left
hand SBB (-05), Figure 2-2.
Figure 2-2 Install Tri-link and Cable in Storage Ports of SBBs
3. Install power cords in power supplies on unit.
4. Attach the cables from your host bus adapters to their respective ports on the
DS-DWZZH-09. Refer to Chapter 3, Figure 3-2 for the SCSI ID port
assignments on the DS-DWZZH-09.
5. Connect your storage subsystem via cable to the remaining port on the
tri-link attached to the right-hand SBB of the DS-DWZZH-09.
2–2
SH R-111 0
EK–SMDZS–UG. B01