Cleaning; Troubleshooting - Motorola MBP16/2 User Manual

6. CLEANING

Clean MBP16, MBP16/2 with a slightly damp cloth or
with an anti-static cloth. Never use cleaning agents or
abrasive solvents.
Cleaning and care
• Do not clean any part of the product with thinners or
other solvents and chemicals - this may cause
permanent damage to the product which is not
covered by the warranty.
• Keep your MBP16, MBP16/2 away from hot, humid
areas or strong sunlight, and don't let it get wet.
• Every effort has been made to ensure high standards
of reliability for your MBP16, MBP16/2. However, if
something does go wrong, please do not try to repair
it yourself - contact Customer Service for assistance.
14

7. TROUBLESHOOTING

Link light on the parent unit does not come on
• Check whether the parent unit is powered on.
• Check whether the supplied battery pack is correctly
installed and that it is not drained.
• Recharge the parent unit by connecting it to the power
supply.
Link light on the parent unit flashes
• The parent unit and the baby unit may be out of range
with each other. Reduce the distance between the
units, but not closer than 1.5 metre.
• The baby unit may be switched off. Press and hold
key to switch on the baby unit.
Low battery light on the parent unit flashes
• Battery pack in the parent unit is running low. Connect
the parent unit to the mains power with the supplied
power adaptor for recharging.
The parent unit beeps
• Lost connection with the baby unit. Reduce the
distance between the parent unit and the baby unit, but
not closer than 1.5 metre.
• The baby unit may be switched off. Press and hold
key to switch on the baby unit.
0
0
CLEANING