Table of Contents
Advertisement
Help Guide
print.html[3/4/2022 1:58:33 PM]
When connecting an audio system not compatible with ARC using an HDMI
cable, you need to connect an optical audio cable to the DIGITAL AUDIO
OUT (OPTICAL) to output digital sound.
(Cable/Antenna input)
Connects to Cable/Antenna/External Box.
Note
When connecting the cable to the Cable/Antenna input, finger tighten
only, over tightening the connection can damage the TV.
LAN
Connect to a Router.
Connect to the Internet using a LAN cable.
CENTER SPEAKER IN
To use your TV speakers as the center speaker, connect the output of your
AV receiver to the CENTER SPEAKER IN on your TV.
To use your TV speakers as the center speaker, press the
Settings) button on the remote control, then select [Settings] — [Display &
Sound] — [Audio output] — [Speakers] — [Audio system].
Note
Before connecting cables, disconnect the AC power cord (mains
lead) of both the TV and AV receiver.
If you do not use the CENTER SPEAKER IN terminal or the S-
CENTER SPEAKER IN input, change the following setting to prevent
noise from the speakers.
Press the
(Quick Settings) button on the remote control, and
disable [TV center speaker mode] in [Settings] — [Display & Sound]
— [Audio output].
S-CENTER SPEAKER IN
Connects the TV and an audio device with an S-CENTER OUT output/jack
using a TV center speaker mode cable. Before connecting, make sure you
unplug the AC power cord (mains lead) of the TV and audio device to be
connected.
For details, refer to Using the TV as a center speaker (only models with TV
center speaker mode).
Note
If you do not use the CENTER SPEAKER IN terminal or the S-
(Quick
18
Advertisement
Table of Contents
