Table of Contents
Advertisement
Help Guide | Connecting terminal
01_10.html[3/4/2022 1:59:35 PM]
LAN
Connect to a Router.
Connect to the Internet using a LAN
cable.
CENTER SPEAKER IN
To use your TV speakers as the center
speaker, connect the output of your AV
receiver to the CENTER SPEAKER IN on
your TV.
To use your TV speakers as the center
speaker, press the
(Quick Settings)
button on the remote control, then select
[Settings] — [Display & Sound] — [Audio
output] — [Speakers] — [Audio system].
Note
Before connecting cables,
disconnect the AC power cord
(mains lead) of both the TV and
AV receiver.
If you do not use the CENTER
SPEAKER IN terminal or the S-
CENTER SPEAKER IN input,
change the following setting to
prevent noise from the speakers.
Press the
(Quick Settings)
button on the remote control, and
disable [TV center speaker mode]
in [Settings] — [Display & Sound]
— [Audio output].
S-CENTER SPEAKER IN
Connects the TV and an audio device with
an S-CENTER OUT output/jack using a
TV center speaker mode cable. Before
connecting, make sure you unplug the AC
power cord (mains lead) of the TV and
audio device to be connected.
For details, refer to
Using the TV as a
center speaker (only models with TV
center speaker mode)
.
Note
171
Advertisement
Table of Contents
