Sony XR55A80CJ Help Manual page 103

Help Guide
Note
When [Automatically check for update] is disabled, the TV cannot receive notifications even
when a software update is available.
Updating software via USB storage device
If you do not have a network connection, you can also update the software by using a USB storage
device. Use your computer to download the latest software from the Sony support website onto a USB
storage device. Insert the USB storage device to a USB port on the TV and the software update will
start automatically.
If you will update the TV software by using a USB storage device, you should read the cautions for
update by USB storage device on the website.
For more about the support site, please see the Support Site page.
Related topics
Connecting to a Network
[97] Start here | Start here
If a full reset (restart) of the TV is required
If you have trouble such as the picture not displaying on the screen or the remote control not working,
reset the TV with the following procedure. If the problem persists, try the factory reset procedure below.
If an external USB device is connected to the TV, disconnect the USB device from the TV before
resetting.
Power Reset
1
Restart the TV with the remote control.
Press and continue holding the power button on the remote control for about 5 seconds until
the TV restarts (a shutting down message will appear).
If the issue persists, unplug the TV and press the power button on the TV once.
Then wait 2 minutes before turning on the TV. Depending on the model, you can press and
hold the power button on the TV (40 seconds or longer) until it turns off and restarts.
print.html[3/4/2022 1:58:33 PM]
102