Wahl TM602 User Manual page 28

TC6XX-TM6XX Series
Press CLEAR to return to the table of values.

At this level, you can find out some statistics on the measurements made (Min, Max, Avg and Std. Dev.
Press the F2 key three times (...) followed by the F1 key (STAT).

Press F2 (measurements) to return to the table of values.

Press CLEAR to quit the storage function.

Record burst:
This function makes it possible to record the burst in the memory.
You are then requested to enter the name of a file. Using the navigation keys ( and ), scroll down the letters.

Using the navigation keys ( and ), move the cursor by one position.

Using the F2 key(

Once you have entered the file name, confirm by pressing the VAL key.

Open burst:
Allows you to choose a burst among many and to open it to display the values. At this level, you can obtain information
on the acquisition burst, such as the number of measurements, the date of acquisition, the sensor used, etc.
New free burst:
Allows you to start a new acquisition burst. If a burst is under way, you will be requested to save it.
Burst management:
Allows you to display all the bursts recorded. At this level, you can delete one or all bursts.
28
), you can delete the characters entered
RELATED FUNCTIONS