The Usb Connector; The Screen - Wahl TM602 User Manual

TC6XX-TM6XX Series
B.1.5

The USB connector

The TC6XX-TM6XX Series range is fitted with a USB connector (mini B) intended for uploading new software versions
and device adjustment.
B.1.6

The screen

The TC6XX-TM6XX Series range is fitted with a graphic LCD display with back-lighting. The display resolution is 160 x
160 pixels. In normal operating conditions, the display is divided up into seven horizontal fields:
st
The 1 field indicates the operating mode (Measurement or emission).

nd
The 2 field indicates the date, time and battery charge.

rd
The 3 field is reserved for icons indicating the operating mode (related functions: Scaling, filtering...).

th
The 4 field indicates the operating mode, the gauge and certain related functions.

th
The 5 field indicates the value of the measurement or of the emission. These values are expressed in mV, Ohm,

°C, °F or as a %.
th
The 6 field indicates (in measurement mode) the min., average and max. values of the measurement.

th
Lastly, the 7 field indicates the functionality of keys F1 and F2.

nd
2 field indicating
the Date, time and
battery charge.
rd
3 field indicating the
configuration
pictograms
th
6 field indicating the
min, ave and max.
measurement values.
The table below provides a definition of each pictogram displayed on the screen:
12
USB port
(mini B connector)
by
th
7 field indicating
functions of the F1 and F2
keys.
USING THE INSTRUMENT
st
1 field indicating the
operating mode
th
4 field indicating the
measurement
simulation mode, the
gauge and the main
related functions.
th
5 field indicating the
value
measurement or the
emission value (in mV,
the
°C,°F or %)
or
of the