Wahl TM602 User Manual page 19

 Voltage / resistance or temperature generation / cyclic ramp editing?
Press the F2 key to display the edit menu.

Using the navigation keys ( and ), choose the CYCLIC RAMP mode and confirm (VAL key).

The values emitted are those programmed in the CONFIGURATION/RAMP menu (see the chapter entitled Related
functions).
Using the navigation key (), start the automatic increases phase (following the parameters programmed in the

CONFIGURATION/RAMP menu).
Using the navigation key (), you can decrease automatically starting from the max. programmed voltage (or

temperature).
Using the navigation key (), you can increase manually the voltage (or temperature) emitted (following the

parameters programmed in the CONFIGURATION/RAMP menu).
Using the navigation key (), you can decrease manually the voltage emitted starting from the max. programmed

voltage (or temperature).
The Hold key allows you to stop generating or to resume it
You can resume the generation of the ramp in step-by-step mode by pressing the navigation keys ( and  ) or in
automatic generation using the navigation keys ( and ).
 Voltage or temperature generation / default editing?
The default emission mode is a mode that makes it possible to generate manually the values stored for the synthesizer
function.
Press the F2 key to display the edit menu.

Using the navigation keys ( and ), choose the Default values mode and confirm (VAL key).

Values to be emitted
Using the navigation keys ( and ), select the value that needs to be emitted.

Confirm using the VAL key.

 Voltage / resistance or temperature generation / synthesizer?
Press the F2 key to display the edit menu.

Using the navigation keys ( and ), choose the Synthesizer mode and confirm (VAL key).

The values emitted are those programmed in the CONFIGURATION/Synthesizer menu (see the chapter entitled Related
functions).
Using the navigation key (), start the automatic increases phase (following the parameters programmed in the

CONFIGURATION/Synthesizer menu).
Using the navigation key (), you can decrease automatically starting from the max. programmed voltage (or

temperature).
Using the navigation key (), you can increase manually the voltage (or temperature) emitted (following the

parameters programmed in the CONFIGURATION/Synthesizer menu).
Using the navigation key (), you can decrease manually the voltage emitted starting from the max. programmed

voltage (or temperature).
The Hold key allows you to stop generating or to resume it
You can resume the generation of the ramp in step-by-step mode by pressing the navigation keys ( and  ) or in
automatic generation using the navigation keys ( and ).
The configuration of the parameters for the ramps and default values is explained in the chapter entitled "Related
Functions".
Voltage / resistance or temperature simulation
C
19