Table of Contents
Advertisement
The provided Remote Control Unit allows the unit to be
operated from a distance.
When operating the remote control unit, point it
towards the REMOTE SENSOR on the front panel of the
unit.
< Even if the remote control unit is operated within the
effective range, remote control operation may be
impossible if there are any obstacles between the
unit and the remote control.
< If the remote control unit is operated near other
appliances which generate infrared rays, or if other
remote control devices using infrared rays are used
near the unit, it may operate incorrectly. Conversely,
the other appliances may operate incorrectly.
Battery Installation
1
Remove the battery compartment cover.
2
Insert two "AAA" (R03, SUM-4) dry batteries. Make
sure that the batteries are inserted with their
positive "+" and negative "_" poles positioned
correctly.
3
Close the cover.
Battery Replacement
If the distance required between the remote control
unit and main unit decreases, the batteries are
exhausted. In this case replace the batteries with new
ones.
8
Remote Control Unit
Precautions concerning batteries
< Be sure to insert the batteries with correct positive
"+" and negative "_" polarities.
< Use batteries of the same type. Never use different
types of batteries together.
< Rechargeable and non-rechargeable batteries can
be used. Refer to the precautions on their labels.
< When the remote control unit is not to be used for a
long time (more than a month), remove the batteries
from the remote control unit to prevent them from
leaking. If they leak, wipe away the liquid inside the
battery compartment and replace the batteries with
new ones.
< Do not heat or disassemble batteries and never
dispose of old batteries by throwing them in a fire.
RESET Switch
In the following cases, function buttons may not
work properly.
1) When the system is damaged by some electrical
shock.
2) When the power is irregular or has electrical
noise.
In these cases, press the RESET switch once or
twice lightly with a pencil or a ball-point pen when
the unit is on.
Advertisement
Table of Contents
