Download Print this page

Siemens 6ES7134-4NB01-0AB0 Manual

Simatic et 200s distributed i/o analog electronic module.
Hide thumbs

Advertisement

SIMATIC ET 200S distributed I/O 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0)
SIMATIC
ET 200S distributed I/O
2AI TC HF analog electronic
module (6ES7134-4NB01-0AB0)
Manual
04/2007
A5E01076892-01
Preface
______________
Properties
______________
Parameters
______________
Diagnostics
______________
Analog value representation
______________
Connecting
1
2
3
4
5

Advertisement

   Related Manuals for Siemens 6ES7134-4NB01-0AB0

   Summary of Contents for Siemens 6ES7134-4NB01-0AB0

  • Page 1

    Preface SIMATIC ET 200S distributed I/O 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) ______________ Properties ______________ Parameters SIMATIC ______________ Diagnostics ET 200S distributed I/O 2AI TC HF analog electronic ______________ Analog value representation module (6ES7134-4NB01-0AB0) ______________ Connecting Manual 04/2007 A5E01076892-01...

  • Page 2

    Trademarks All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

  • Page 3: Preface

    Additional support If you have any questions relating to the products described in these operating instructions, and do not find the answers in this document, please contact your local Siemens representative. http://www.siemens.com/automation/partner...

  • Page 4

    ● The bulletin board, a worldwide knowledge exchange for users and experts. ● Your local contact for Automation & Drives in our contact database. ● Information about on-site services, repairs, spare parts. Lots more can be found on our "Services" pages. 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 5: Table Of Contents

    Table of contents Preface ..............................3 Properties ..............................7 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) ............7 Parameters .............................. 13 Parameters...........................13 Parameter description........................14 Diagnostics .............................. 15 Diagnostics using LED display.....................15 Error types............................16 Analog value representation ........................17 Introduction ..........................17 Analog value representation for measuring range with SIMATIC S7 ..........17 Measuring ranges ........................19...

  • Page 6

    Table of contents 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 7: Properties

    Properties 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Properties ● 2 inputs for thermocouple or voltage measurement ● Input ranges: – Voltage measurement: ± 80 mV, resolution 15 bits + sign – Thermocouples: Types E, N, J, K, L, S, R, B, T, C, resolution 15 bits + sign ●...

  • Page 8

    Properties 1.1 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Usable terminal modules Usable terminal modules for 2AI TC HF (6ES7134-4NB01-0AB0) TM-E15C24-AT Spring terminal (6ES7193-4CL30-0AA0) TM-E15S24-AT (6ES7193-4CL20-0AA0) Screw-type terminal Block diagram Figure 1-1 Block diagram of the 2AI TC HF 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0)

  • Page 9

    Properties 1.1 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) 2AI TC HF technical specifications (6ES7134-4NB01-0AB0) Dimensions and weight Width (mm) Weight Approx. 40 g Module-specific data Supports isochronous operation Number of inputs Cable length Shielded • Max. 50 m Parameter length...

  • Page 10

    Properties 1.1 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Suppression of interference, limits of error Noise suppression for f = n x (f1 ± 1 %), (f1 = interference frequency) Common-mode interference (U • min. 90 dB min. 70 dB Series-mode interference •...

  • Page 11

    Compensation of thermocouples with a compensating box As well as the error limits of the 2AI TC HF electronic module (see Table "Technical specifications 2AI TC HF (6ES7134-4NB01-0AB0)" in this chapter) you must also take the accuracy of the compensating box into account.

  • Page 12

    Properties 1.1 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 13: Parameters

    TC-EL Type L (Fe-Cu-Ni) • Only with thermocouples. A parameter assignment error occurs when the wire break diagnostics are enabled in the voltage measuring range. The module does not start up. 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 14: Parameter Description

    The following diagrams show the step response with the various smoothing factors in relation to the number of module cycles. Figure 2-1 Smoothing with the 2AI TC HF 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 15: Diagnostics

    Event (LED) Cause Remedy No configuration or incorrect Check the parameter module plugged in. No load assignment. Check the load voltage.present There is a voltage. Evaluate the diagnostic message. diagnostics. 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 16: Error Types

    00110: Line to the encoder Correct the process wiring. Open circuit interrupted. 10101: Error on the reference channel Check the reference module Reference channel error 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 17: Analog Value Representation

    Analog value Bit number Significance of the bits Sign The sign (S) of the analog value is always in bit number 15: ● "0" → + ● "1" → – 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 18

    S 0 0 0 0 0 0 0 0 0 0 0 1 x x 15 + sign S 0 0 0 0 0 0 0 0 0 0 0 0 0 1 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 19: Measuring Ranges

    1820,0 18200 4718 2786,5 27865 6CD9 Nominal range 0000 0140 -0,1 FFFF 31,9 013F Underrange -120,0 -1200 FB50 -184,0 -1840 F8D0 < -120,0 -32768 8000 < -184,0 -32768 8000 Underflow 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 20

    10001 2711 1832,1 18321 4791 1000,0 10000 2710 1832,0 18320 4790 Nominal range -270,0 -2700 F574 -454,0 -4540 EE44 < -270,0 - 32768 8000 < -454,0 - 32768 8000 Underflow 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 21

    13721 3599 2501,7 25062 61B9 1372,0 13720 3589 2501,6 25061 61B8 Nominal range -270,0 -2700 F574 -454,0 -4540 EE44 < -270,0 - 32768 8000 < -454,0 - 32768 8000 Underflow 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 22

    Overshoot range 1300,1 13001 32C9 2372,1 23721 5CA9 1300,0 13000 32C8 2372,0 23720 5CA8 Nominal range -270,0 -2700 F574 -454,0 -4540 EE44 < -270,0 -32768 8000 -32768 8000 <EE44 Underflow 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 23

    Overshoot range 400,1 4001 0FA1 752,1 7521 1DC1 400,0 4000 0FA0 752,0 7520 1D60 Nominal range -270,0 -2700 F574 -454,0 -4540 EE44 < -270,0 -32768 8000 < -454,0 -32768 8000 Underflow 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 24: Voltage Measuring Ranges

    "Overflow/underflow" diagnostics Measured value after leaving the • -32767 8000 • disabled underrange "Lower limit value undershot" • diagnostic message "Wire-break check" diagnostics Open input: Undefined measured • • disabled value 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 25: Effect On Analog Value Representation

    Overflow 7FFF End of the overshoot range +1 plus overflow bit Underflow 8000 End of the underrange -1 plus overflow Prior to parameter assignment, or 7FFF 7FFF incorrect parameter assignment 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 26

    Analog value representation 4.4 Effect on analog value representation 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 27: Connecting

    The steps you have to take are described in this chapter. 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 28

    The following schematic representation illustrates the connection of isolated measuring encoders to the optically isolated analog input modules. ① Logic ② Backplane bus ③ Ground bus ④ Central grounding point ⑤ Isolated measuring encoders 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 29

    Logic ② Backplane bus ③ Ground bus ④ Equipotential bonding conductor ⑤ Non-isolated measuring encoders Non-isolated thermocouples When using non-isolated thermocouples, you must comply with the permitted common mode voltage. 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 30: Connecting Thermocouples

    ET 200S terminal module. The compensating lines are made of the same material as the wires of the thermocouple. The supply lines are made of copper. Ensure the correct polarity when connecting. 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 31: Wiring Unused Channels On Analog Input Modules

    ● To adhere to the permissible potential differences (U ), you must wire jumpers on the terminal module for the unused channels. Analog input module TM connecting terminal Channel 0 Channel 1 2AI TC HF 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 32

    ● Use shielded wires to the sensors and actuators. ● Lay out the wire shields on the shield connection. ● Connect the shield connection to the ground bus with low impedance. 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 33: Using The Shield Connection

    Smoothing, 14 Connecting measuring encoders to analog inputs, 27 Technical Support, 4 Disposal, 3 Thermocouples, 30 Training center, 4 Internet Service & Support, 4 Isolated measuring encoders, 28 LED display, 15 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

  • Page 34

    Index 2AI TC HF analog electronic module (6ES7134-4NB01-0AB0) Manual, 04/2007, A5E01076892-01...

This manual also for:

2ai tc hf

Comments to this Manuals

Symbols: 0
Latest comments: