Daikin Clima-Flex CLIV Series Control Manual page 6

flow, thermal load and line voltage under the current conditions in
which the equipment operates in the field.
Finally, the operation of the equipment is tested and verified
according to AHRI's operating standards.
NOTE: The warranty policy requires that the commissioning
be carried out by qualified personnel authorized by
INSITUM ® CORROSION PROTECTION
Spray for coating hvac/r products
Coating is a flexible, water-based, water-reducible, synthetic
polymer corrosion coating designed specifically for the protection
of HVAC/R coils and components. Insitu® Spray Applied Coating
contains ES2 (embedded stainless steel pigment) technology, an
anti-corrosion coating specifically designed for the protection of
coils mounted in corrosive areas.
HVAC/R coils, components and enclosures will have a permanent
water-based synthetic coating with ES2 pigment applied to all
areas of the coating surface with no bridging of material between
fins. Therefore, ES2 pigments are suitable for even the most
cm-cliv-cf-eng
corrosive environments and will maintain their appearance after
many years of exposure. UV degradation ES2 pigments form a
multilayer structure throughout the paint film.
This creates a barrier layer that reflects sunlight away from the
paint film preventing UV rays from penetrating. As a result, UV
degradation of individual polymer molecules is eliminated, film
integrity is maintained and the pigment particles remain well
anchored to the substrate.
The resulting smooth, hard finish prevents dirt build-up. The
multilayer structure of ES2 pigments delays the passage of water
molecules into the film and acts as an effective moisture barrier
Ideal applications for Insitu® spray-applied coatings.
• Mini-splits
• Packaged enclosures
• Condensing units
• Modular air handlers
• Air-cooled chillers
• Indoor and outdoor HVAC cabinets and copper tubing
• Heat exchange coils (water, condenser, evaporator, DX)
6
Features / Benefits
www.clima-flex.com