Pride Mobility Zero Turn 10 Owner's Manual page 18

Mid-size scooter
Table of Contents

Advertisement

Available languages

Available languages

I I I . B AT T E R I E S A N D C H A R G I N G
WARNING! If the battery charger is equipped with cooling slots, then do not attempt to insert
objects through these slots.
WARNING! Be aware that the battery charger case may become hot during charging. Avoid skin
contact and do no place on surfaces that may be affected by heat.
WARNING! If your battery charger has not been tested and approved for outdoor use, then do
not expose it to adverse or extreme weather conditions. If the battery charger is exposed to
adverse or extreme weather conditions, then it must be allowed to adjust to the difference in
environmental conditions before use indoors. Refer to the manual supplied with the battery
charger for more information.
Follow the 6 easy steps in fi gure 12 to charge your batteries safely:
1
4
Figure 12. Battery Charging Procedures Diagram
NOTE: For model 710ZT, the manual freewheel levers operate in the opposite direction (see fi gure 7). Therefore,
for step 3 of fi gure 12, the levers must be pushed forward to engage drive mode.
WARNING! The LED lights on the charger indicate different charger conditions at various times.
If the LED does not indicate that charging is complete within 24 hours, unplug the charger
from the outlet and contact your Provider. Refer to the operating instructions supplied with the
charger for a complete explanation of these indicators.
NOTE: There is a charger inhibit function on your scooter. The scooter will not run and the battery condition
meter will not operate while the batteries are charging.
FREQUENTLY ASKED QUESTIONS
How does the charger work?
When your scooter's battery voltage is low, the charger works harder, sending more electrical current to the batteries
to bring up their charge. As the batteries approach a full charge, the charger sends less and less electrical current.
When the batteries are fully charged, the current sent from the charger is at nearly zero amperage. Therefore, when
the charger is plugged in, it maintains the charge on your scooter's batteries, but does not overcharge them. Refer
to the manual supplied with the battery charger for charging instructions.
18
2
5
8-14H
3
6
Mid-size Scooter Series

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents