Pride Mobility Zero Turn 10 Owner's Manual page 13

REAR COMPONENTS
The manual freewheel lever, anti-tip wheels, motor/
transaxle assembly, and optional safety fl ag brackets
are located on your scooter as shown. See fi gure 6.
Although not shown, the batteries and main circuit
breaker (reset button) are also located on the rear
component section of your scooter.
WARNING! Before placing your
scooter into or taking it out of
freewheel mode, remove the key
from the key switch. Never sit on
a scooter when it is in freewheel
mode. Never put a scooter in
freewheel mode on any incline.
Manual Freewheel Lever
Whenever you need or want to push your scooter
for short distances, you can put it in freewheel
mode.
1. Remove the key from the key switch.
2. Push forward on the manual freewheel lever to
disable the drive system and the brake system.
This will enable you to push the scooter.
NOTE: If your scooter is equipped with a
2-position manual freewheel lever, you must
pull up on the lever and then push forward on
the manual freewheel lever to disable the drive
system and the brake system. This will enable you
to push the scooter.
3. Pull back on the manual freewheel lever to
reengage the drive and the brake systems and
take your scooter out of freewheel mode.
WARNING! When your scooter is in freewheel mode, the braking system is disengaged.
Disengage the drive motors only on a level surface.

Ensure the key is removed from the key switch.

Stand to the side of the scooter to engage or disengage freewheel mode. Never sit on a

scooter to do this.
After you have fi nished pushing your scooter, always return it to the drive mode to lock the

brakes.
NOTE: If the scooter is placed in freewheel mode (manual freewheel lever forward) while the key is in the
"on" position, the scooter will not run until the manual freewheel lever is pushed rearward and the key is
turned to the "off " position, then back to the "on" position.
Mid-size Scooter Series
I I . Y O U R S C O O T E R
Figure 6. Rear Components
IDENTIFICATION KEY
1. MANUAL FREEWHEEL LEVER
2. MOTOR/TRANSAXLE ASSEMBLY
3. ANTI-TIP WHEELS
4. SAFETY FLAG BRACKET
2
3
4
Drive Mode
(Drive Engaged)
1
Freewheel Mode
(Drive Disengaged)
13