Powering On the Projector
Follow these instructions to power on the projector:
1. Ensure that the power cord and signal cable are
2. Remove the lens cap 1 from the projector by pulling
3. Turn on the Main power switch 2 on the back of the
MP1400 Microportable Projector
securely connected.
Make sure the projector is perpendicular to the projection
screen.
it straight out.
projector and allow the projector to warm up for one
to two minutes.
When the projector has warmed up, the Compaq startup
screen displays, and the LED on the STANDBY button 3 turns
green.
1-11