Connecting A Monitor; Powering On The Projector - Compaq iPAQ MP1200 User Manual

Compaq user's guide ipaq microportable projector mp1200

Hide thumbs Also See for iPAQ MP1200:

Table of Contents

Connecting a Monitor

1. Connect the monitor cable 1 to the VGA-out connector on

the side of the projector.

2. Connect one end of the power cord 2 into the side of the

projector, and the other end to an electrical outlet that is

easily accessible and close to the projector.

1. Make sure the power cord and signal cable are securely

connected.

✎

Make sure the projector is perpendicular to the projection screen.

Compaq iPAQ Microportable Projector MP1200 User's Guide

Using the Projector

2–5

Table of Contents