Connecting The Projector To Other Video Sources; Powering On The Projector - Compaq MP1800 User Manual

Connecting the Projector to Other Video Sources

The optional Compaq Multimedia Adapter must be used to connect
the projector to a camcorder, DVD player, or videocassette
recorder. This adapter converts signals from the camcorder, DVD
player, or videocassette recorder for compatibility with the
projector.
Refer to Chapter 3, "Using the Compaq Multimedia Adapter," for
information on attaching and using the Compaq Multimedia
Adapter.

Powering On the Projector

Follow these instructions to power on the projector:
1. Make sure the computer and projector power cords and the
signal cable are securely connected.
✎
Make sure the projector is perpendicular to
the projection screen.
2. Remove the lens cap – by pulling it straight out.
3. Turn on the main power switch — on the back of the projector
and allow the projector to warm up for one to two minutes.
When the projector has warmed up, the Compaq startup screen
displays and the LED on the Standby button ˜ turns green.
Getting Started 1-11