Page 3
Seite 6 - 21 Page 22 - 37 Page 38 - 53 Página 54 - 69 Pagina 70 - 85 Side 86 - 101...
Page 4
D - 42327 Wuppertal Ersatzteilliste Tel.: +49(0)202 / 787 - 0 Fax: +49(0)202 / 787 - 2217 www.walther-pilot.de • e-mail: info@walther-pilot.de Allgemeines Typenbezeichnung Handspritzpistolen PILOT Mini / -MP / -K Kennzeichnung der Modelle Bestimmungsgemäße Verwendung PILOT Mini Fließbecher V1015102xxx PILOT Mini...
Page 5
Ersatzteilliste PILOT Mini Ersatzteilliste PILOT Mini PILOT Mini PILOT Mini PILOT Mini-MP PILOT Mini-MP Fließbecher Materialanschluss Fließbecher Materialanschluss V1015102xx3 V1015202xx3 V1014102xx3 V1014202xx3 Pos. Bezeichnung Stck Artikelnummer Stck Artikelnummer Pos. Bezeichnung Stck Artikelnummer Stck Artikelnummer Luftkopf Luftkopf Düsengröße 0,3 bis 1,5 mm ø...
Page 6
Ersatzteilliste PILOT Mini-K Reparatursets WALTHER hält für die Handspritzpistolen PILOT Mini / -MP und -K Reparatursets PILOT Mini-Kleber PILOT Mini-Kleber bereit, die sämtliche Verschleißteile enthalten. Diese Teile sind in der Ersatzteilliste Fließbecher Materialanschluss durch Fettdruck gekennzeichnet. V1015132xx3 V1015234xx3 Ersatzteil-Nr. Pos.
Page 7
Bestimmungsgemäße Verwendung Zur sachwidrigen Verwendung gehören z.B.: • das Verspritzen von Materialien auf Personen und Tiere Die Handspritzpistolen PILOT Mini sowie -MP dient ausschließlich der Verarbeitung • das Verspritzen von flüssigem Stickstoff. spritzbarer Medien, wie z.B.: • Lacke und Farben Technische Beschreibung •...
Page 8
Rechtsdrehen (Einschrauben) zum Rundstrahl. Tragen Sie im Arbeitsbereich der Spritzpistole einen Gehörschutz. Der erzeugte Schallpegel der Spritzpistole beträgt ca. 85 dB (A) (PILOT Mini und Mini-K) bzw. ca. Die Regelschraube (Pos. 17) dient zur Regulierung der Zerstäuberluftmenge. 83 dB (A) (PILOT Mini-MP).
Page 9
Materialanschluss (Pos. 28) der Spritzbild verändern: Spritzpistole. Sie können an der PILOT Mini durch die folgenden Einstellungen das Spritzbild Füllen Sie Material in das Materialdruckgefäß verändern (siehe auch Abbildungen Seite 15 / 16): und verschließen Sie den Deckel.
Page 10
Die o.g. Bestandteile verursachen an galvanisierten Bauteilen chemische Reaktionen und führen zu Korrosionsschäden. Hinweis Das Nadeleinstellmaß (x) bei PILOT MINI (FB) beträgt 103,5 mm und bei PILOT Mini Reinigen Sie die Spritzpistole (FA) 121,5 mm von der Nadelspitze bis zur Mitnehmerbuchse.
Page 11
Mängel eines Spritzbildes beheben Technische Daten Die folgende Tabelle zeigt Ihnen, mit welchen Einstellungen Sie das Spritzbild Gewicht: 295 g / 0,6 Ib beeinflussen können. Anschlüsse: angestrebtes Spritzergebnis Materialanschluss G 1/4“ Luftanschluss G 1/4“ Spritzbildprobe Abweichung erforderliche Einstellung Spritzbild ist in der Mitte •...
Tel.: +49(0)202 / 787 - 0 Replacement parts Fax: +49(0)202 / 787 - 2217 www.walther-pilot.de • e-mail: info@walther-pilot.de General Information Type Designation Hand-held Spray Guns PILOT Mini / -MP / -K Identification of Model Version PILOT Mini Gravity-Feed Cup V1015102xxx Normal Use...
Page 13
Replacement parts PILOT Mini Replacement parts PILOT Mini PILOT Mini PILOT Mini PILOT Mini-MP PILOT Mini-MP Gravity-Feed Cup Material Connection Gravity-Feed Cup Material Connection V1015102xx3 V1015202xx3 V1014102xx3 V1014202xx3 Item Description Qty. Art. No. Qty. Art. No. Item Description Qty. Art. No.
Page 14
WALTHER supplies repair sets containing all wearing parts for the manual spray PILOT Mini-Adhesive PILOT Mini-Adhesive guns PILOT Mini / -MP and -K. This wearing parts are shown in boldface print in the Gravity-Feed Cup Material Connection list of the replacement parts.
With the PILOT Mini-MP the spraying pressure is from 1.2 to 1.4 bar with an input pressure of 3.0 to 3.3 bar. This equipment complies with the explosion protection requirements of Directive...
The noise level generated by the spray gun is approx. 85 dB (A) The air volume regulating control (item 17) is used to adjust the atomizing air input. (PILOT Mini and Mini-K) or approx. 83 dB (A) (PILOT Mini-MP). After carrying out assembly or maintenance work, always ensure that all nuts, bolts Safety instructions and screw connections have been fully tightened before the gun is used.
(item 28) of the Spray Pattern Adjustment: gun. The spray pattern of the spray guns of model series PILOT Mini may be adjusted as Fill the material pressure tank with material follows (look also at the figures of page 31 / 32).
Note • before each change of spraying material The needle setting for the PILOT Mini (FB) is X = 103,5 mm and for the PILOT Mini • at least once a week or (FA) X = 121,5 mm from the needle tip to the driving bushing.
Correction of Spray Pattern Imperfections Technical Data The following table shows how to correct a defective spray pattern. Weight: 295 g / 0,6 Ib Desired Spray Pattern Connections: Material connection G 1/4“ Spray pattern Fault Necessary adjustment Air connection G 1/4“ test Choice of nozzle sizes: 0.3 •...
Tel.: +49(0)202 / 787 - 0 Fax: +49(0)202 / 787 - 2217 Généralités www.walther-pilot.de • e-mail: info@walther-pilot.de Caractérisation des modèles Dénomination du modèle Pistolets de pulvérisation manuels PILOT Mini / -MP / -K Utilisation courante PILOT Mini à godet gravité V1015102xxx Utilisation inappropriée PILOT Mini à...
Page 21
Pièces de rechange PILOT Mini Pièces de rechange PILOT Mini PILOT Mini PILOT Mini PILOT Mini-MP PILOT Mini-MP godet gravité alimentation matière godet gravité alimentation matière V1015102xx3 V1015202xx3 V1014102xx3 V1014202xx3 Rep. Description No. d‘article No. d‘article Rep. Description No. d‘article No.
Page 22
Pièces de rechange PILOT Mini-K Kits de réparation WALTHER tient à votre disposition des kits de réparation qui contiennent toutes les PILOT Mini-Colle PILOT Mini-Colle pièces à usure (imprimées en charactères gras). godet gravité alimentation matière No. d‘article V1015132xx3 V1015234xx3 PILOT Mini Rep.
Le terme „utilisation courante“ présuppose que toutes les instructions et consignes d’utilisation ont été lues, comprises et suivies. PILOT Mini-MP: Pour une pression d‘entrée de 3,0 à 3,3 bar, la pression de pulvéri- sation est de 1,2 à 1,4 bar.
Portez une protection contre le bruit dans la zone de travail. Le niveau sonore du gauche (en dévissant), on obtient un jet large, vers la droite (en vissant) un jet rond. pistolet en opération est de 85 dB (A) (PILOT Mini et Mini-K) et de 83 dB (A) (PILOT Mini-MP).
Régulation du jet: teur de pression de matière d‘une pompe et La régulation du jet des modèles PILOT Mini peut être modifiée par les rélages sur le raccord d‘arrivée de matière (rep. 28) du suivants (regardez aussi à la reproduction de la page 47 / 48).
Ces éléments génèrent des réactions chimiques oxydantes. Recommandation La cote de réglage pour PILOT Mini (FB) est X = 103,5 mm et pour PILOT Mini (FA) Nettoyez le pistolet: X = 121,5 mm de la pointe de l’aiguille à la goupille d’entraînement.
Informations techniques Correction d’un jet imparfait Le tableau suivant indique les réglages pouvant modifier la forme du jet. Poids net: 295 g / 0,6 Ib Résultat d’application recherché Raccord: raccord de matière G 1/4“ Essai Défaut Remède raccord d’air G 1/4“ d’application Le jet est trop épais Choix de buses:...
Page 28
Partes de recambio Tel.: +49(0)202 / 787 - 0 Fax: +49(0)202 / 787 - 2217 www.walther-pilot.de • e-mail: info@walther-pilot.de Generalidades Denominación del Pistolas de pulverisación manuales PILOT Mini/ -MP / -K Identificación del modelo modelo PILOT Mini Depósito de gravedad V1015102xxx Uso común...
Page 29
Partes de recambio PILOT Mini Ersatzteilliste PILOT Mini PILOT Mini PILOT Mini PILOT Mini-MP PILOT Mini-MP depósito d. gravedad Empalme de material depósito d. gravedad Empalme de material V1015102xx3 V1015202xx3 V1014102xx3 V1014202xx3 Pos. Denominación Uds. Referencia Uds. Referencia Pos. Denominación Uds.
Page 30
Partes de recambio PILOT Mini-K Kits de reparación WALTHER ofrece un kit de reparación para las pistolas manuales de la serie PILOT PILOT Mini-Pegamento PILOT Mini-Pegamento Mini / -MP / -K que contiene todas las piezas de desgaste. Estas piezas de desgaste depósito d.
• la pulverización de nitrígeno líquido Uso común Las pistolas PILOT Mini como -MP se prestan a la aplicación de toda clase de mate- Carácteristicas técnicas riales pulverizables, como por ejemplo: •...
Utilice una protección auditiva en el área de trabajo. El nivel de ruido de la pistola es Un giro a la izquierda (aflojar) produce un chorro ancho. de 85 dB (A) (PILOT Mini y Mini-K) o 83 dB (A) (PILOT Mini-MP). Un giro a la derecha (apretar) produce un chorro redondo.
Modificación del chorro de pulverización: o un purificador de aire y con el empalme de Es posible modificar el chorro de la PILOT Mini con los siguientes ajustes (véase la aire (pos. 21) de la pistola. ilustración a la pagina 63 / 64).
La medida de ajuste de la aguja en la PILOT Mini (FB) es de X = 103,5 mm y en la PILOT Mini (FA) de X = 121,5 mm desde la punta de la aguja hasta el casquillo de Límpie la pistola...
Eliminar los defectos de la prueba de aplicación Datos tecnicos El cuadro siguiente indica los ajustes que modifican la forma del chorro. Peso: 295 g / 0,6 Ib Resultado deseado Dotación detoberas a opción: 0,3 •0,5 •0,8 •1,0 •1,2 • 1,5 •1,8 •2,0 •2,2 mm ø...
Reserveonderdelen Tel.: +49(0)202 / 787 - 0 Fax: +49(0)202 / 787 - 2217 www.walther-pilot.de • e-mail: info@walther-pilot.de Algemeen Typekentekening Handspuitpistolen PILOT Mini / -MP / -K Aanduiding van de modellen Doelmatig gebruik PILOT Mini Beker met druppelaar V1015102xxx Ondoelmatig gebruik...
Page 37
Reserveonderdelen PILOT Mini Reserveonderdelen PILOT Mini PILOT Mini PILOT Mini PILOT Mini-MP PILOT Mini-MP Beker met druppelaar Materiaalaansluit Beker met druppelaar Materiaalaansluit V1015102xx3 V1015202xx3 V1014102xx3 V1014202xx3 Pos. Benaming Stk. Reservedelsnr. Stk. Reservedelsnr Pos. Benaming Stk. Reservedelsnr. Stk. Reservedelsnr Luchtkop Luchtkop...
Page 38
Reserveonderdelen PILOT Mini-K Reparatiesets WALTHER houdt voor de handspuitpistolen PILOT Mini / -MP en -K reparatiesets PILOT Mini-Lijm PILOT Mini-Lijm gereed die alle aan slijtage onderhevige onderdelen bevatten. Deze onderdelen staan Beker met druppelaar Materiaalaansluit in de lijst met reserveonderdelen vetgedrukt aangegeven.
Page 39
Doelmatig gebruik graaf Doelamtig gebruik. Iedere andere toepassing is ondoelmatig. Tot ondoelmatig gebruik horen b.v.: De handspuitpistolen PILOT Mini en -MP dienen uitsluitend voor de verwerking van • het verspuiten van materialen op personen en dieren spuitbare middelen, zoals b.v.: •...
Page 40
Draag oorbescherming tijdens het werken met het spuitpistool. Het door het spuitpi- De regelschroef (pos. 17) dient voor de regeling van het luchtvolume van de verstui- stool geproduceerde geluidsniveau bedraagt ca. 85 dB (A) (PILOT Mini en Mini-K) ver. resp. ca. 83 dB (A) (PILOT Mini-MP).
Page 41
(gezuiverde perslucht) en op de lucht- Spuitbeeld wijzigen: aansluiting van het spuitpistool (pos. 21). U kunt bij de PILOT Mini het spuitbeeld wijzigen door de volgende instellingen (zie Bevestig de materiaaltoevoerslang op het ook afbeeldingen blz. 79 / 80).
Page 42
Aanwijzing De naaldinstelmaat bij PILOT Mini (FB) bedraagt X = 103,5 mm en bij PILOT Mini Reinig het spuitpistool (FA) X = 121,5 mm van de punt van de naald tot aan de meenemerbus.
Page 43
Gebreken van een spuitbeeld verhelpen Technische gegevens Gewicht 295 gram / 0,6 Ib Uit de volgende tabel kunt u afleiden met welke instellingen u het spuitprofiel kunt beïinvloden. Gewenst resultat Aansluitingen: Materiaalaansluiting G 1/4“ Luchtaansluiting G 1/4“ Spuitprofieltes Afwijking Benodigde instelling Spuitbeeld is in het midden •...
Page 44
D - 42327 Wuppertal Reservedelsliste Tel.: +49(0)202 / 787 - 0 Fax: +49(0)202 / 787 - 2217 www.walther-pilot.de • e-mail: info@walther-pilot.de Generelt Typebeskrivelse Håndsprøjtepistoler PILOT Mini / -MP / K Identifikation af modellerne PILOT Mini V1015102xxx Normal anvendelse PILOT Mini Materialetilslutning...
Page 45
Reservedelsliste PILOT Mini Reservedelsliste PILOT Mini PILOT Mini PILOT Mini PILOT Mini-MP PILOT Mini-MP Topkop Materialetilslutning Topkop Materialetilslutning V1015102xx3 V1015202xx3 V1014102xx3 V1014202xx3 Pos. Betegnelse Stk. Reservedelsnr. Stk. Reservedelsnr. Pos. Betegnelse Stk. Reservedelsnr. Stk. Reservedelsnr. Luftkappe Luftkappe Dysestørrelse V1015130036* V1015130039* Dysestørrelse...
Page 46
Reservedelsliste PILOT Mini-K Reparationssæt WALTHER kan levere reparationssæt indeholdende alle sliddele til håndsprøjtepisto- PILOT Mini-lim PILOT Mini-lim lerne PILOT Mini / -MP og -K. Disse dele er markeret med fed skrift i reservedelsli- Topkop Materialetilslutning sten. V1015132xx3 V1015234xx3 Reservedelsnr. Pos.
Page 47
Normal anvendelse • at sprøjte materialer på personer og dyr • at sprøjte flydende kvælstof. Håndsprøjtepistolerne PILOT Mini og -MP er udelukkende beregnet til at bearbejde medier, som kan sprøjtes, f.eks.: Teknisk beskrivelse • Lakker og farver •...
Page 48
Brug høreværn i sprøjtepistolens arbejdsområde. Sprøjtepistolens støjniveau er ca. Sprøjtestrålen bliver til en bredstråle ved at dreje til venstre (ud), 85 dB (A) (PILOT Mini og Mini-K) resp. ca. 83 dB (A) (PILOT Mini-MP). til en rundstråle ved at dreje til højre (i).
Page 49
Justering af sprøjtebilledet: tepistolens materialetilslutning (pos. 28). På PILOT Mini kan sprøjtebilledet ænders med følgende instillinger Fyld materiale i materialetrykbeholderen og (Se også figurer side 95 / 96). luk dækslet.
Page 50
De ovennævnte stoffer forårsager kemiske reaktioner på galvaniserede komponen- ter og resulterer i korrosionsskader. Råd Nåleindstillingsmålet ved PILOT MINI (FB) er X = 103,5 mm og ved PILOT MINI (FA) Sprøjtepistolen skal renses X = 121,5 mm fra nålespids til medbringerbøsning.
Page 51
Afhjælp mangler ved et sprøjtebillede Tekniske data De følgende tabel viser, med hvilke indstillinger de kan få indflydelse på sprøjtebille- Vægt: 295 gram / 0,6 Ib det. tilstræbte sprøjteresultat Tilslutninger: Materiale tilslutning G 1/4“ Test af sprøjtebillede Afvigelse nødvendige Lufttilslutning G 1/4“...
Page 53
Das WALTHER PILOT - Programm • Hand-Spritzpistolen • Automatik-Spritzpistolen • Niederdruck-Spritzpistolen (System HVLP) • Pistolen-Düsenverlängerungen für Innenbeschichtungen • Zweikomponenten-Spritzpistolen • Materialdruckbehälter • Drucklose Behälter • Rührwerk-Systeme • Airless-Geräte und Flüssigkeitspumpen • Materialumlaufsysteme • Farbnebel-Absaugsysteme • Zuluft-Systeme • Arbeitsschutz und Zubehör Bestell-Nr.:...