Table of Contents
Advertisement
Example
Connect Update kit
20901330_EN_VVIEW (extd)_V1.11_230223
6
6
Service menus
Service menus
6.1 Update
6.1
Update
NOTICE
NOTICE
Damage to the gauge due to incorrect execution of
updates.
Gauges may be damaged by incorrect or unauthorized proce‑
dure.
Please note that you must have the necessary authorizations
>
and basic knowledge for an update.
Always connect only one gauge to the VACUU·BUS
>
kit and run updates individually.
6.1.1 Preparation
6.1.1
Preparation
Connect VACUU·BUS
VACUU·BUS
1. Disconnect VACUU·BUS
power supply plug.
2. Connect wall power supply plug, gauge and VACUU·BUS
Update kit one after the other to the Y adapter.
3. Connect the VACUU·BUS
end device).
5 With the first connection of the Update kit the operating
system displays an information prompt, e. g., Hardware
Wizard displays Found New Hardware.
4. Plug the wall power supply into the mains socket.
1
see chapter 9.2 Ordering information
9.2 Ordering information
-Update-Kit
1
®
Update kit
®
connector from gauge and wall
®
Update kit to a PC or laptop (=
®
Service menus
Update
®
®
35
Advertisement
Table of Contents
