Installation - ProBreeze PB-AC04 Instruction Manual

INSTALLATION

―
Before first use
• Ensure the appliance is always upright
throughout moving and installation.
• Do not place or use the appliance,
power cord, or any accessories in a
bathroom, or any wet or damp place.
• Place the appliance on a stable, flat, dry
surface. Keep it at least 50cm away from
surrounding walls/objects.
• Leave the appliance in an upright
position for at least two hours.
Heat Exhaust Hose Installation
Air Conditioners work by pulling in air, cooling
it, and then blowing the cooled air back out.
The hot air remains inside the appliance and
needs to be dispelled. To prevent this hot
air recirculating the room, connect your heat
exhaust hose and lead it to an external area
outside your home through a door or window.
How to connect your heat exhaust hose:
• Find the short side of the rectangular
heat exhaust hose connector with
notches on the top and bottom.
• Align this with the right-hand side of the
exhaust hose connector bracket and
slide it in.
• The heat exhaust hose will lock into
place with a click.
10 | English
Heat Exhaust Hose Installation
1. Align the left-hand short side of the
rectangle heat exhaust hose connector
with the right-hand short side of the heat
exhaust hose connector.
2. Slide the rectangle heat exhaust
3. connector to the left fully into the heat
exhaust hose connector.
4. The heat exhaust hose connector
locking clip will lock the rectangle heat
exhaust hose connector into place.
Sliding Windows Sealing Board Installation
1. Adjust the sealing board by sliding the
panels away from each other until it is
the correct length for your window.
2. Place the screw in the hole in the panel
and slide the groove over the flat edge
of the screw.
3. When you have your desired length,
place the washer over the screw and
tighten the bolt.
4. Close the window to secure the sliding
panels.
English | 11